On Fri, May 10, 2024 at 8:02 PM Dmitry Baryshkov
<dmitry.barysh...@linaro.org> wrote:
>
> On Fri, May 10, 2024 at 09:10:34AM +0200, Barnabás Czémán wrote:
> > On Fri, May 10, 2024 at 8:46 AM Barnabás Czémán <traba...@gmail.com> wrote:
> > >
> > > On Fri, May 10, 2024 at 2:56 AM Dmitry Baryshkov
> > > <dmitry.barysh...@linaro.org> wrote:
> > > >
> > > > On Thu, May 09, 2024 at 08:14:07PM +0200, Barnabás Czémán wrote:
> > > > > Move DCS off commands from .unprepare to .disable so that they
> > > > > actually reach the DSI host.
> > > > >
> > > > > Signed-off-by: Barnabás Czémán <traba...@gmail.com>
> > > > > ---
> > > > > drivers/gpu/drm/panel/panel-jdi-fhd-r63452.c | 12 ++++++++++--
> > > > > 1 file changed, 10 insertions(+), 2 deletions(-)
> > > >
> > > > I don't think this is correct. If the driver sends enable commands in
> > > > prepare, it should be able to send commands during unprepare too.
> > > >
> > > It cannot send commands in unprepare, there are multiple panel drivers
> > > what do the same.
> > > Every panel drivers which have DCS commands to be sent in unprepare
> > > has similar error messages with mdp5/dpu.
> > >
> > > [ 92.322564] panel-td4320-boeplus c994000.dsi.0: sending command
> > > 0x28 failed: -22
> > > [ 92.322635] panel-td4320-boeplus c994000.dsi.0: Failed to
> > > un-initialize panel: -22
> > >
> > >
> > Here is the error messages, these are comes from unprepare by every panel
> > off:
> > [ 121.295290] panel-jdi-fhd-r63452 994000.dsi.0: transmit data failed: -22
> > [ 121.295368] panel-jdi-fhd-r63452 994000.dsi.0: Failed to
> > un-initialize panel: -22
> > [ 184.783019] panel-jdi-fhd-r63452 994000.dsi.0: transmit data failed: -22
> > [ 184.783066] panel-jdi-fhd-r63452 994000.dsi.0: Failed to
> > un-initialize panel: -22
> > with this patch these errors no more.
> > .prepare works because of this flag ctx->panel.prepare_prev_first = true;
>
> The flag should also invert the order of post_disable chain. It well
> might be that the drm/msm/dsi driver shuts down the DSI link too soon.
> Please consider fixing the MSM DSI driver instead.
>
Ok, thank you i look forward to it.
> --
> With best wishes
> Dmitry