Renesas RTS7751R2D Plus devicetree.

Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
---
 arch/sh/boot/dts/rts7751r2dplus.dts | 172 ++++++++++++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 arch/sh/boot/dts/rts7751r2dplus.dts

diff --git a/arch/sh/boot/dts/rts7751r2dplus.dts 
b/arch/sh/boot/dts/rts7751r2dplus.dts
new file mode 100644
index 000000000000..a67bd50cc80a
--- /dev/null
+++ b/arch/sh/boot/dts/rts7751r2dplus.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Renesas RTS7751R2D Plus
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sh7751r.dtsi"
+
+/ {
+       model = "Renesas RTS7715R2D Plus";
+       compatible = "renesas,rts7751r2d", "renesas,sh7751r";
+
+       aliases {
+               serial0 = &scif1;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@c000000 {
+               device_type = "memory";
+               reg = <0x0c000000 0x4000000>;
+       };
+
+       r2dintc: interrupt-controller@a4000000 {
+               compatible = "renesas,sh7751-irl-ext";
+               reg = <0xa4000000 0x02>;
+               interrupt-controller;
+               #address-cells = <0>;
+               #interrupt-cells = <2>;
+               /*
+                * b15: 12 - TP
+                * b14:  9 - PCI INTA
+                * b13: 10 - PCI INTB
+                * b12:  3 - PCI INTC
+                * b11:  0 - PCI INTD
+                * b10:  4 - SM501
+                * b9:   1 - CF IDE
+                * b8:   2 - CF CD
+                * b7:   8 - SDCARD
+                * b6:   5 - KEY
+                * b5:   6 - RTC ALARM
+                * b4:   7 - RTC T
+                * b3: unassigned
+                * b2: unassigned
+                * b1: unassigned
+                * b0:  11  -EXT
+                */
+               renesas,enable-reg = <12 9 10 3 0 4 1 2 8 5 6 7 15 15 15 11>;
+       };
+
+       sm501: display@10000000 {
+               compatible = "smi,sm501";
+               reg = <0x10000000 0x03e00000
+                      0x13e00000 0x00200000>;
+               interrupt-parent = <&r2dintc>;
+               interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+               mode = "640x480-16@60";
+               smi,little-endian;
+               smi,devices = "usb-host", "uart0";
+               smi,swap-fb-endian;
+               #gpio-cells = <2>;
+               edid = [00 ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00
+                       00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
+                       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                       00 00 00 00 00 00 f0 0a 80 fb 20 e0 25 10 32 60
+                       02 00 00 00 00 00 00 06 00 00 00 00 00 00 00 00
+                       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+                       00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bd];
+
+               smi,misc-timing-ex = "16";
+               smi,misc-timing-xc = "internal-pll";
+               smi,misc-timing-usb-current = "disable";
+               smi,misc-control-pad = "24";
+               smi,misc-control-usbclk = "xtal";
+               smi,misc-control-sh = "active-low";
+
+               gpio {
+                       pin-0 = "ioport";
+                       pin-1 = "function";
+               };
+
+               crt {
+                       smi,flags = "use-init-done",
+                                   "disable-at-exit",
+                                   "use-hwcursor",
+                                   "use-hwaccel";
+               };
+
+               panel {
+                       bpp = <16>;
+                       smi,flags = "use-init-done",
+                                   "disable-at-exit",
+                                   "use-hwcursor",
+                                   "use-hwaccel";
+               };
+       };
+
+       compact-flash@b4001000 {
+               compatible = "renesas,rts7751r2d-ata", "ata-generic";
+               reg = <0xb4001000 0x0e>, <0xb400080c 2>;
+               reg-shift = <1>;
+               interrupt-parent = <&r2dintc>;
+               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+       };
+
+       flash@0 {
+               compatible = "cfi-flash";
+               reg = <0x00000000 0x02000000>;
+               device-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "U-Boot";
+                       reg = <0x00000000 0x00040000>;
+               };
+
+               partition@1 {
+                       label = "Environemt";
+                       reg = <0x00040000 0x00040000>;
+               };
+
+               partition@2 {
+                       label = "Kernel";
+                       reg = <0x00080000 0x001c0000>;
+               };
+
+               partition@3 {
+                       label = "Flash_FS";
+                       reg = <0x00240000 0x00dc0000>;
+               };
+       };
+};
+
+&extal {
+       clock-frequency = <22222222>;
+};
+
+&cpg {
+       renesas,mode = <5>;
+};
+
+&scif1 {
+       status = "okay";
+};
+
+&pcic {
+       ranges = <0x02000000 0 0xfd000000 0xfd000000 0 0x01000000>,
+                <0x01000000 0 0x00000000 0xfe240000 0 0x00040000>;
+       dma-ranges = <0x03000000 0 0xab000000 0xab000000 0 0x00000004>,
+                    <0x02000000 0 0x0c000000 0x0c000000 0 0x04000000>,
+                    <0x02000000 0 0xd0000000 0xd0000000 0 0x00000004>;
+       interrupt-map = <0x0000 0 0 1 &r2dintc 9  IRQ_TYPE_LEVEL_LOW>,
+                       <0x0000 0 0 2 &r2dintc 10 IRQ_TYPE_LEVEL_LOW>,
+                       <0x0000 0 0 3 &r2dintc 3  IRQ_TYPE_LEVEL_LOW>,
+                       <0x0000 0 0 4 &r2dintc 0  IRQ_TYPE_LEVEL_LOW>,
+                       <0x0800 0 0 1 &r2dintc 10 IRQ_TYPE_LEVEL_LOW>,
+                       <0x0800 0 0 2 &r2dintc 3  IRQ_TYPE_LEVEL_LOW>,
+                       <0x0800 0 0 3 &r2dintc 0  IRQ_TYPE_LEVEL_LOW>,
+                       <0x0800 0 0 4 &r2dintc 9  IRQ_TYPE_LEVEL_LOW>,
+                       <0x1000 0 0 1 &r2dintc 3  IRQ_TYPE_LEVEL_LOW>,
+                       <0x1000 0 0 2 &r2dintc 0  IRQ_TYPE_LEVEL_LOW>,
+                       <0x1000 0 0 3 &r2dintc 9  IRQ_TYPE_LEVEL_LOW>,
+                       <0x1000 0 0 4 &r2dintc 10 IRQ_TYPE_LEVEL_LOW>;
+       interrupt-map-mask = <0x1800 0 0 7>;
+       status = "okay";
+};
-- 
2.39.2

Reply via email to