On Wed, Jun 26, 2024 at 09:55:21PM GMT, Dmitry Baryshkov wrote:
> On Wed, Jun 26, 2024 at 06:07:50PM GMT, Dave Stevenson wrote:
> > Hi Dmitry
> >
> > On Wed, 26 Jun 2024 at 17:11, Dmitry Baryshkov
> > <dmitry.barysh...@linaro.org> wrote:
> > >
> > > On Wed, Jun 26, 2024 at 04:10:05PM GMT, Dave Stevenson wrote:
> > > > Hi Maxime and Dmitry
> > > >
> > > > On Wed, 26 Jun 2024 at 15:05, Maxime Ripard <mrip...@kernel.org> wrote:
> > > > >
> > > > > On Fri, Jun 21, 2024 at 02:09:04PM GMT, Dmitry Baryshkov wrote:
> > > > > > On Fri, 21 Jun 2024 at 12:27, Maxime Ripard <mrip...@kernel.org>
> > > > > > wrote:
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > Sorry for taking some time to review this series.
> > > > > >
> > > > > > No problem, that's not long.
> > > > > >
> > > > > > >
> > > > > > > On Sat, Jun 15, 2024 at 08:53:32PM GMT, Dmitry Baryshkov wrote:
> > > > > > > > Several DRM drivers implement HDMI codec support (despite its
> > > > > > > > name it
> > > > > > > > applies to both HDMI and DisplayPort drivers). Implement generic
> > > > > > > > framework to be used by these drivers. This removes a
> > > > > > > > requirement to
> > > > > > > > implement get_eld() callback and provides default
> > > > > > > > implementation for
> > > > > > > > codec's plug handling.
> > > > > > > >
> > > > > > > > The framework is integrated with the DRM HDMI Connector
> > > > > > > > framework, but
> > > > > > > > can be used by DisplayPort drivers.
> > > > > > > >
> > > > > > > > Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
> > > > > > > > ---
> > > > > > > > drivers/gpu/drm/Makefile | 1 +
> > > > > > > > drivers/gpu/drm/drm_connector.c | 8 ++
> > > > > > > > drivers/gpu/drm/drm_connector_hdmi_codec.c | 157
> > > > > > > > +++++++++++++++++++++++++++++
> > > > > > > > include/drm/drm_connector.h | 33 ++++++
> > > > > > > > 4 files changed, 199 insertions(+)
> > > > > > > >
> > >
> > > [...]
> > >
> > > > > > > > +
> > > > > > > > +static int drm_connector_hdmi_codec_get_eld(struct device
> > > > > > > > *dev, void *data,
> > > > > > > > + uint8_t *buf, size_t
> > > > > > > > len)
> > > > > > > > +{
> > > > > > > > + struct drm_connector *connector = data;
> > > > > > > > +
> > > > > > > > + // FIXME: locking against drm_edid_to_eld ?
> > > > > > > > + memcpy(buf, connector->eld, min(sizeof(connector->eld),
> > > > > > > > len));
> > > > > > > > +
> > > > > > > > + return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int drm_connector_hdmi_codec_hook_plugged_cb(struct
> > > > > > > > device *dev,
> > > > > > > > + void *data,
> > > > > > > > +
> > > > > > > > hdmi_codec_plugged_cb fn,
> > > > > > > > + struct device
> > > > > > > > *codec_dev)
> > > > > > > > +{
> > > > > > > > + struct drm_connector *connector = data;
> > > > > > > > +
> > > > > > > > + mutex_lock(&connector->hdmi_codec.lock);
> > > > > > > > +
> > > > > > > > + connector->hdmi_codec.plugged_cb = fn;
> > > > > > > > + connector->hdmi_codec.plugged_cb_dev = codec_dev;
> > > > > > > > +
> > > > > > > > + fn(codec_dev, connector->hdmi_codec.last_state);
> > > > > > > > +
> > > > > > > > + mutex_unlock(&connector->hdmi_codec.lock);
> > > > > > > > +
> > > > > > > > + return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +void drm_connector_hdmi_codec_plugged_notify(struct
> > > > > > > > drm_connector *connector,
> > > > > > > > + bool plugged)
> > > > > > > > +{
> > > > > > > > + mutex_lock(&connector->hdmi_codec.lock);
> > > > > > > > +
> > > > > > > > + connector->hdmi_codec.last_state = plugged;
> > > > > > > > +
> > > > > > > > + if (connector->hdmi_codec.plugged_cb &&
> > > > > > > > + connector->hdmi_codec.plugged_cb_dev)
> > > > > > > > +
> > > > > > > > connector->hdmi_codec.plugged_cb(connector->hdmi_codec.plugged_cb_dev,
> > > > > > > > +
> > > > > > > > connector->hdmi_codec.last_state);
> > > > > > > > +
> > > > > > > > + mutex_unlock(&connector->hdmi_codec.lock);
> > > > > > > > +}
> > > > > > > > +EXPORT_SYMBOL(drm_connector_hdmi_codec_plugged_notify);
> > > > > > >
> > > > > > > I think we should do this the other way around, or rather, like
> > > > > > > we do
> > > > > > > for drm_connector_hdmi_init. We'll need a hotplug handler for
> > > > > > > multiple
> > > > > > > things (CEC, HDMI 2.0, audio), so it would be best to have a
> > > > > > > single
> > > > > > > function to call from drivers, that will perform whatever is
> > > > > > > needed
> > > > > > > depending on the driver's capabilities.
> > > > > >
> > > > > > I see, this API is probably misnamed. The hdmi_codec_ops use the
> > > > > > 'plugged' term,
> > > > >
> > > > > Is it misnamed?
> > > > >
> > > > > It's documented as:
> > > > >
> > > > > Hook callback function to handle connector plug event. Optional.
> > > > >
> > > > > > but most of the drivers notify the ASoC / codec during
> > > > > > atomic_enable /
> > > > > > atomic_disable path, because usually the audio path can not work
> > > > > > with
> > > > > > the video path being disabled.
> > > > >
> > > > > That's not clear to me either:
> > > > >
> > > > > - rockchip/cdn-dp, msm/dp/dp-audio, dw-hdmi, seem to call it at
> > > > > enable/disable
> > > > >
> > > > > - anx7625, mtk_hdmi and mtk_dp calls it in detect
> > > > >
> > > > > - adv7511, ite-it66121, lontium-lt9611, lontium-lt9611uxc, sii902x,
> > > > > exynos, tda998x, msm_hdmi, sti, tegra, vc4 don't call it at all.
> > > >
> > > > FWIW I have a patch in the next set that adds the call to vc4. The
> > > > downstream version of the patch is at [1].
> > >
> > > Nice!
> > >
> > > > > So it doesn't look like there's a majority we can align with, and
> > > > > neither should we: we need to figure out what we *need* to do and
> > > > > when,
> > > > > and do that.
> > > > >
> > > > > From the documentation and quickly through the code though, handling
> > > > > it
> > > > > in detect looks like the right call.
> > > >
> > > > We concluded that hotplug detect appeared to be the right place as well.
> > >
> > > Probably you also stumbled upon hotplug vs enable/disable. Could you
> > > please comment, why you made your decision towards hotplug path?
> >
> > We hit it in trying to get Pipewire to do the right thing on
> > hotplugging HDMI cables, and updating the lists of available audio
> > destinations in desktop plugins.
> > My memory is a little hazy, but I seem to recall the logic was that
> > whilst changing audio destination when you unplug the currently
> > selected HDMI output is reasonable, but doing so because you changed
> > resolution or the screen saver kicked in was less user friendly.
> > mtk_hdmi was used as a basis for the patch, although it's all largely
> > boilerplate anyway.
>
> Hmm, I should check how this is handled on the standard desktops. With
> the DisplayPort and link training it might take a significant amount of
> time to switch the mode.
>
> > Yes the audio has to stop on enable/disable as HDMI video dictates all
> > the timings.
> > I've just checked with aplay playing audio and kmstest to change video
> > mode - audio pauses as it is disabled and resumes when the new mode is
> > selected.
> > One observation that I can't immediately explain is that if I use
> > kmstest to disable the HDMI display that is playing the audio, aplay
> > still completes without any errors logged. Using "time" on aplay is
> > returning the same duration for the playback whether the HDMI output
> > is enabled or not. That may be down to the vc4 hardware with the HDMI
> > FIFO accepting the data at the correct rate whether the video side is
> > enabled or not, but that is just a guess.
>
> I guess so. With msm/hdmi and with msm/dp we should be getting an error
> when the video is turned off. I don't remember if it is an immediate
> error or something that happens at the end of the period. Adding Srini,
> our audio expert, he should know it better.
>
> For external HDMI bridges I completely have no idea, but I guess we
> don't need to worry too much, as they are just taking I2S or SPDIF audio
> from the bus.
>
> In the worst case we conclude that the calling point is driver-dependent
> and as such it is not suitable to call the plugged callback from the
> drm_bridge_connector.It would really surprise me here: the spec will require something, ALSA will require something else, and we'll have to bridge the gap, but there's nothing really device specific here, it's all software. Maxime
signature.asc
Description: PGP signature
