On 27/06/2024 17:27, Thomas Zimmermann wrote:
Do all mode setting in ast_crtc_helper_mode_set_nofb(), which
always runs after disabling the CRTC and before programming the
planes. Removes implicit synchronization between the CRTC's
atomic disable, enable and the vertical retrace.

Display-mode updates require HW cursors to be disabled. The HW
cursor only picks up changes at vertical retrace periods. So the
CRTC's atomic_disable helper waited for the retrace to delay any
following mode-setting operations, which then happened in
atomic_enable. See [1] for a description of the problem.

With the CRTC helper callback mode_set_nofb, we can now synchronize
and reprogram in the same place. As it always runs before the plane
update, the plane code can be reordered with the CRTC's later
atomic_enable et al.

Thanks, it looks good te me.

Reviewed-by: Jocelyn Falempe <jfale...@redhat.com>


Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
Link: https://patchwork.freedesktop.org/series/79914/ # 1
---
  drivers/gpu/drm/ast/ast_mode.c | 52 ++++++++++++++++++----------------
  1 file changed, 28 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
index 421fcdad40e4..e8312b3472ed 100644
--- a/drivers/gpu/drm/ast/ast_mode.c
+++ b/drivers/gpu/drm/ast/ast_mode.c
@@ -1131,6 +1131,33 @@ ast_crtc_helper_mode_valid(struct drm_crtc *crtc, const 
struct drm_display_mode
        return status;
  }
+static void ast_crtc_helper_mode_set_nofb(struct drm_crtc *crtc)
+{
+       struct drm_device *dev = crtc->dev;
+       struct ast_device *ast = to_ast_device(dev);
+       struct drm_crtc_state *crtc_state = crtc->state;
+       struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state);
+       struct ast_vbios_mode_info *vbios_mode_info =
+               &ast_crtc_state->vbios_mode_info;
+       struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+
+       /*
+        * Ensure that no scanout takes place before reprogramming mode
+        * and format registers.
+        *
+        * TODO: Get vblank interrupts working and remove this line.
+        */
+       ast_wait_for_vretrace(ast);
+
+       ast_set_vbios_mode_reg(ast, adjusted_mode, vbios_mode_info);
+       ast_set_index_reg(ast, AST_IO_VGACRI, 0xa1, 0x06);
+       ast_set_std_reg(ast, adjusted_mode, vbios_mode_info);
+       ast_set_crtc_reg(ast, adjusted_mode, vbios_mode_info);
+       ast_set_dclk_reg(ast, adjusted_mode, vbios_mode_info);
+       ast_set_crtthd_reg(ast);
+       ast_set_sync_reg(ast, adjusted_mode, vbios_mode_info);
+}
+
  static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
                                        struct drm_atomic_state *state)
  {
@@ -1207,30 +1234,12 @@ ast_crtc_helper_atomic_flush(struct drm_crtc *crtc,
static void ast_crtc_helper_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state)
  {
-       struct drm_device *dev = crtc->dev;
-       struct ast_device *ast = to_ast_device(dev);
-       struct drm_crtc_state *crtc_state = 
drm_atomic_get_new_crtc_state(state, crtc);
-       struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state);
-       struct ast_vbios_mode_info *vbios_mode_info =
-               &ast_crtc_state->vbios_mode_info;
-       struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-
-       ast_set_vbios_mode_reg(ast, adjusted_mode, vbios_mode_info);
-       ast_set_index_reg(ast, AST_IO_VGACRI, 0xa1, 0x06);
-       ast_set_std_reg(ast, adjusted_mode, vbios_mode_info);
-       ast_set_crtc_reg(ast, adjusted_mode, vbios_mode_info);
-       ast_set_dclk_reg(ast, adjusted_mode, vbios_mode_info);
-       ast_set_crtthd_reg(ast);
-       ast_set_sync_reg(ast, adjusted_mode, vbios_mode_info);
-
        ast_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
  }
static void ast_crtc_helper_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_state *state)
  {
        struct drm_crtc_state *old_crtc_state = 
drm_atomic_get_old_crtc_state(state, crtc);
-       struct drm_device *dev = crtc->dev;
-       struct ast_device *ast = to_ast_device(dev);
ast_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); @@ -1245,16 +1254,11 @@ static void ast_crtc_helper_atomic_disable(struct drm_crtc *crtc, struct drm_ato
         * simple pageflips on the planes.
         */
        drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false);
-
-       /*
-        * Ensure that no scanout takes place before reprogramming mode
-        * and format registers.
-        */
-       ast_wait_for_vretrace(ast);
  }
static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
        .mode_valid = ast_crtc_helper_mode_valid,
+       .mode_set_nofb = ast_crtc_helper_mode_set_nofb,
        .atomic_check = ast_crtc_helper_atomic_check,
        .atomic_flush = ast_crtc_helper_atomic_flush,
        .atomic_enable = ast_crtc_helper_atomic_enable,

Reply via email to