Hi,
Michael Walle <mwa...@kernel.org> 于2024年7月11日周四 03:38写道：
>
> On Wed Jul 10, 2024 at 9:12 PM CEST, Doug Anderson wrote:
> > Hi,
> >
> > On Wed, Jul 10, 2024 at 2:02 AM Michael Walle <mwa...@kernel.org> wrote:
> > >
> > > On Wed Jul 10, 2024 at 10:47 AM CEST, Cong Yang wrote:
> > > > Break select page cmds into helper function.
> > >
> > > Why though? I don't find that anything easier to read. In fact, I
> > > deliberately chose not to factor that out into a function. It's just
> > > a sequence of magic commands, taken straight from the datasheet. So,
> > > I'd like to keep it that way.
> >
> > The consensus of previous discussion on the lists was that folks
> > agreed that we should, where possible, make it more obvious what these
> > magic sequences of commands were doing. IMO separating out the page
> > switch command helps. Certainly I'm always happy to hear other
> > opinions, though.
>
> Fair enough, but in that case, one should take the datasheet (which
> you can find online) and replace all the magic numbers with the
> correct command names from it. E.g. 0xff is the ENEXTC register. To
> be clear, I'm not just talking about the "switch page command".
>
> As patch stands, I don't see much value, TBH. On the contrary, you
> make it harder to compare it with the Ortustech panel datasheet.
>
> just my 2c,
> -michael
If all drivers replace all the magic numbers with the correct command names,
it will be a huge amount of work (assuming that the datasheet can be found).
I am afraid I don't have enough time to complete it. Thanks.
>
> > > -michael
> > >
> > > > Signed-off-by: Cong Yang <yangco...@huaqin.corp-partner.google.com>
> > > > ---
> > > > drivers/gpu/drm/panel/panel-ilitek-ili9806e.c | 14 ++++++++++----
> > > > 1 file changed, 10 insertions(+), 4 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > > > b/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > > > index e4a44cd26c4d..68fb9a1a4d80 100644
> > > > --- a/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > > > +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9806e.c
> > > > @@ -35,6 +35,12 @@ struct ili9806e_panel {
> > > > enum drm_panel_orientation orientation;
> > > > };
> > > >
> > > > +#define ILI9806E_DCS_SWITCH_PAGE 0xff
> > > > +
> > > > +#define ili9806e_switch_page(ctx, page) \
> > > > + mipi_dsi_dcs_write_seq_multi(ctx, ILI9806E_DCS_SWITCH_PAGE, \
> > > > + 0xff, 0x98, 0x06, 0x04, (page))
> > > > +
> > > > static const char * const regulator_names[] = {
> > > > "vdd",
> > > > "vccio",
> > > > @@ -227,7 +233,7 @@ static void ili9806e_dsi_remove(struct
> > > > mipi_dsi_device *dsi)
> > > > static void com35h3p70ulc_init(struct mipi_dsi_multi_context *ctx)
> > > > {
> > > > /* Switch to page 1 */
> > > > - mipi_dsi_dcs_write_seq_multi(ctx, 0xff, 0xff, 0x98, 0x06, 0x04,
> > > > 0x01);
> > > > + ili9806e_switch_page(ctx, 0x01);
> >
> > I think with your change you should remove the "Switch to page X"
> > comments since they're now obvious. Other than that, I'm happy with:
> >
> > Reviewed-by: Douglas Anderson <diand...@chromium.org>
>
