Elan-ekth6a12nay requires reset to pull down time greater than 10ms, so the configuration post_power_delay_ms is 10, and the chipset initial time is required to be greater than 300ms, so the post_gpio_reset_on_delay_ms is set to 300.
The Elan-ekth6a12nay touch screen chip same as Elan-eKTH6915 controller has a reset gpio. The difference is that they have different post_power_delay_ms. Changes between V4 and V3: - PATCH 1/2: Combine the 2 const into an enum. - PATCH 2/2: No changes. - Link to v3: https://lore.kernel.org/all/20240716082851.18173-1-lvzhaoxi...@huaqin.corp-partner.google.com/ Changes between V3 and V2: - PATCH 1/2: "ekth6915" isn't a fallback, modify it. - PATCH 2/2: No changes. - Link to v2: https://lore.kernel.org/all/20240715073159.25064-1-lvzhaoxi...@huaqin.corp-partner.google.com/ Changes between V2 and V1: - PATCH 1/2: Respin the series on top of v6.10. - PATCH 2/2: No changes. - Link to v1: https://lore.kernel.org/all/20240704085555.11204-1-lvzhaoxi...@huaqin.corp-partner.google.com/ Zhaoxiong Lv (2): dt-bindings: HID: i2c-hid: elan: Introduce Elan ekth6a12nay HID: i2c-hid: elan: Add elan-ekth6a12nay timing .../devicetree/bindings/input/elan,ekth6915.yaml | 4 +++- drivers/hid/i2c-hid/i2c-hid-of-elan.c | 8 ++++++++ 2 files changed, 11 insertions(+), 1 deletion(-) -- 2.17.1
