On Thu, Sep 26, 2024 at 08:08:07AM +0200, Helge Deller wrote: > Hi Ville, > > On 9/23/24 17:57, Ville Syrjala wrote: > > Currently setting cursor_blink attribute to 0 before any fb > > devices are around does absolutely nothing. When fb devices appear > > and fbcon becomes active the cursor starts blinking. Fix the problem > > by recoding the desired state of the attribute even if no fb devices > > are present at the time. > > > > Also adjust the show() method such that it shows the current > > state of the attribute even when no fb devices are in use. > > > > Note that store_cursor_blink() is still a bit dodgy: > > - seems to be missing some of the other checks that we do > > elsewhere when deciding whether the cursor should be > > blinking or not > > - when set to 0 when the cursor is currently invisible due > > to blinking, the cursor will remains invisible. We should > > either explicitly make it visible here, or wait until the > > full blink cycle has finished. > > are you planning to send follow-up patches to address those shortcomings?
Nope. I don't really care about those as I never plan to turn the cursor blinking back on after turning it off via udev. -- Ville Syrjälä Intel
