Hi Stefan Ekenberg <[email protected]>, > -----Original Message----- > From: dri-devel <[email protected]> On Behalf Of Stefan > Ekenberg > Sent: 15 November 2024 12:57 > Subject: [PATCH v2] drm/bridge: adv7511_audio: Update Audio InfoFrame properly > > AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while > updating Audio InfoFrame > information and then set to 0 when done. > Otherwise partially updated Audio InfoFrames could be sent out. Two cases > where this rule were not > followed are fixed: > - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated > before/after setting ADV7511_REG_AUDIO_INFOFRAME. > - In audio_startup() use the correct register for clearing > AUDIO_UPDATE bit. > > The problem with corrupted audio infoframes were discovered by letting a HDMI > logic analyser check the > output of ADV7535. > > Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support")
With and without the patch, Audio works on Renesas RZ/V2L SMARC board. Tested-by: Biju Das <[email protected]> > Signed-off-by: Stefan Ekenberg <[email protected]> > --- > Changes in v2: > - Add Fixes tag > - Link to v1: > https://lore.kernel.org/r/[email protected] > --- > drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c > b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c > index > 61f4a38e7d2bf6905683cbc9e762b28ecc999d05..8f786592143b6c81e5a434768b51508d5e5f3c73 > 100644 > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c > @@ -153,7 +153,16 @@ static int adv7511_hdmi_hw_params(struct device *dev, > void *data, > ADV7511_AUDIO_CFG3_LEN_MASK, len); > regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, > ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4); > - regmap_write(adv7511->regmap, 0x73, 0x1); > + > + /* send current Audio infoframe values while updating */ > + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, > + BIT(5), BIT(5)); > + > + regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1); > + > + /* use Audio infoframe updated info */ > + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, > + BIT(5), 0); > > return 0; > } > @@ -184,8 +193,9 @@ static int audio_startup(struct device *dev, void *data) > regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0), > BIT(7) | BIT(6), BIT(7)); > /* use Audio infoframe updated info */ > - regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1), > + regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE, > BIT(5), 0); > + > /* enable SPDIF receiver */ > if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF) > regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, > > --- > base-commit: 59b723cd2adbac2a34fc8e12c74ae26ae45bf230 > change-id: 20241108-adv7511-audio-info-frame-54614dd4bf57 > > Best regards, > -- > Stefan Ekenberg <[email protected]>
