[PATCH 25/38] arm64: dts: mediatek: mt7986a-bpi-r3: Set interrupt-parent to mdio switch

[AngeloGioacchino Del Regno]

Being this an interrupt controller, the binding forbids to use
interrupts-extended and wants an `interrupts` property instead.

Since this interrupt controller's parent is on the GPIO controller
set it as interrupt-parent and change interrupts-extended to just
interrupts to silence a dtbs_check warning.

Signed-off-by: AngeloGioacchino Del Regno 
<angelogioacchino.delre...@collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts 
b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index 6d2762866a1a..e7654dc9a1c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -200,8 +200,9 @@ switch: switch@31 {
                compatible = "mediatek,mt7531";
                reg = <31>;
                interrupt-controller;
+               interrupt-parent = <&pio>;
+               interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
                #interrupt-cells = <1>;
-               interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
                reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
        };
 };
-- 
2.50.1