On Fri, 25 Jul 2025 12:03:54 +0200, Raphael Gallais-Pou wrote: > access-controllers is an optional property that allows a peripheral to > refer to one or more domain access controller(s). > > This property is added when the peripheral is under the STM32 firewall > controller. It allows an accurate representation of the hardware, where > the peripheral is connected to a firewall bus. The firewall can then check > the peripheral accesses before allowing its device to probe. > > Signed-off-by: Raphael Gallais-Pou <raphael.gallais-...@foss.st.com> > --- > Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++ > 1 file changed, 3 insertions(+) >
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml:81:7: [warning] wrong indentation: expected 8 but found 6 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250725-drm-misc-next-v1-2-a59848e62...@foss.st.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
