пт, 19 вер. 2025 р. о 17:36 Neil Armstrong <[email protected]> пише: > > Hi, > > On 12/09/2025 08:42, Svyatoslav Ryhel wrote: > > Document Sharp LQ079L1SX01 panel found in Xiaomi Mi Pad. > > The patch doesn't apply on drm-misc-next, please rebase. >
Sure, but I have synced with drm-misc-next right now and it applied cleanly. I am on top of 048deed5faf0 (drm/drm-misc-next) drm/panel: Add support for KD116N3730A12 Top commit is correct on my side? > Neil > > > > > Signed-off-by: Svyatoslav Ryhel <[email protected]> > > --- > > .../display/panel/sharp,lq079l1sx01.yaml | 99 +++++++++++++++++++ > > 1 file changed, 99 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml > > b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml > > new file mode 100644 > > index 000000000000..08a35ebbbb3c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml > > @@ -0,0 +1,99 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel > > + > > +maintainers: > > + - Svyatoslav Ryhel <[email protected]> > > + > > +description: > > > + This panel requires a dual-channel DSI host to operate and it supports > > + only left-right split mode, where each channel drives the left or right > > + half of the screen and only video mode. > > + > > + Each of the DSI channels controls a separate DSI peripheral. > > + The peripheral driven by the first link (DSI-LINK1), left one, is > > + considered the primary peripheral and controls the device. > > + > > +allOf: > > + - $ref: panel-common-dual.yaml# > > + > > +properties: > > + compatible: > > + const: sharp,lq079l1sx01 > > + > > + reg: > > + maxItems: 1 > > + > > + avdd-supply: > > + description: regulator that supplies the analog voltage > > + > > + vddio-supply: > > + description: regulator that supplies the I/O voltage > > + > > + vsp-supply: > > + description: positive boost supply regulator > > + > > + vsn-supply: > > + description: negative boost supply regulator > > + > > + reset-gpios: > > + maxItems: 1 > > + > > + backlight: true > > + ports: true > > + > > +required: > > + - compatible > > + - reg > > + - avdd-supply > > + - vddio-supply > > + - ports > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + dsi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + panel@0 { > > + compatible = "sharp,lq079l1sx01"; > > + reg = <0>; > > + > > + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; > > + > > + avdd-supply = <&avdd_lcd>; > > + vddio-supply = <&vdd_lcd_io>; > > + vsp-supply = <&vsp_5v5_lcd>; > > + vsn-supply = <&vsn_5v5_lcd>; > > + > > + backlight = <&backlight>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + panel_in0: endpoint { > > + remote-endpoint = <&dsi0_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + panel_in1: endpoint { > > + remote-endpoint = <&dsi1_out>; > > + }; > > + }; > > + }; > > + }; > > + }; > > +... >
