Add device tree nodes for the mdss1 DPTX0 and DPTX1 controllers
with their corresponding PHYs.

Signed-off-by: Mani Chandana Ballary Kuntumalla <[email protected]>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 245 +++++++++++++++++++++++++++
 1 file changed, 245 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi 
b/arch/arm64/boot/dts/qcom/lemans.dtsi
index a78daa827fcd..4af9a439d68f 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -6839,6 +6839,27 @@ mdss1_mdp: display-controller@22001000 {
                                interrupt-parent = <&mdss1>;
                                interrupts = <0>;
 
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+
+                                               dpu1_intf0_out: endpoint {
+                                                       remote-endpoint = 
<&mdss1_dp0_in>;
+                                               };
+                                       };
+
+                                       port@1 {
+                                               reg = <1>;
+
+                                               dpu1_intf4_out: endpoint {
+                                                       remote-endpoint = 
<&mdss1_dp1_in>;
+                                               };
+                                       };
+                               };
+
                                mdss1_mdp_opp_table: opp-table {
                                        compatible = "operating-points-v2";
 
@@ -6863,6 +6884,228 @@ opp-650000000 {
                                        };
                                };
                        };
+
+                       mdss1_dp0_phy: phy@220c2a00 {
+                               compatible = "qcom,sa8775p-edp-phy";
+
+                               reg = <0x0 0x220c2a00 0x0 0x200>,
+                                     <0x0 0x220c2200 0x0 0xd0>,
+                                     <0x0 0x220c2600 0x0 0xd0>,
+                                     <0x0 0x220c2000 0x0 0x1c8>;
+
+                               clocks = <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                                        <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>;
+                               clock-names = "aux",
+                                             "cfg_ahb";
+
+                               #clock-cells = <1>;
+                               #phy-cells = <0>;
+
+                               status = "disabled";
+                       };
+
+                       mdss1_dp1_phy: phy@220c5a00 {
+                               compatible = "qcom,sa8775p-edp-phy";
+
+                               reg = <0x0 0x220c5a00 0x0 0x200>,
+                                     <0x0 0x220c5200 0x0 0xd0>,
+                                     <0x0 0x220c5600 0x0 0xd0>,
+                                     <0x0 0x220c5000 0x0 0x1c8>;
+
+                               clocks = <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+                                        <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>;
+                               clock-names = "aux",
+                                             "cfg_ahb";
+
+                               #clock-cells = <1>;
+                               #phy-cells = <0>;
+
+                               status = "disabled";
+                       };
+
+                       mdss1_dp0: displayport-controller@22154000 {
+                               compatible = "qcom,sa8775p-dp";
+
+                               reg = <0x0 0x22154000 0x0 0x104>,
+                                     <0x0 0x22154200 0x0 0x0c0>,
+                                     <0x0 0x22155000 0x0 0x770>,
+                                     <0x0 0x22156000 0x0 0x09c>,
+                                     <0x0 0x22157000 0x0 0x09c>,
+                                     <0x0 0x22158000 0x0 0x09c>,
+                                     <0x0 0x22159000 0x0 0x09c>,
+                                     <0x0 0x2215a000 0x0 0x23c>,
+                                     <0x0 0x2215b000 0x0 0x23c>;
+
+                               interrupt-parent = <&mdss1>;
+                               interrupts = <12>;
+
+                               clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+                               clock-names = "core_iface",
+                                             "core_aux",
+                                             "ctrl_link",
+                                             "ctrl_link_iface",
+                                             "stream_pixel",
+                                             "stream_1_pixel",
+                                             "stream_2_pixel",
+                                             "stream_3_pixel";
+                               assigned-clocks = <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+                               assigned-clock-parents = <&mdss1_dp0_phy 0>,
+                                                        <&mdss1_dp0_phy 1>,
+                                                        <&mdss1_dp0_phy 1>,
+                                                        <&mdss1_dp0_phy 1>,
+                                                        <&mdss1_dp0_phy 1>;
+                               phys = <&mdss1_dp0_phy>;
+                               phy-names = "dp";
+
+                               operating-points-v2 = <&mdss1_dp_opp_table>;
+                               power-domains = <&rpmhpd SA8775P_MMCX>;
+
+                               #sound-dai-cells = <0>;
+
+                               status = "disabled";
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+
+                                               mdss1_dp0_in: endpoint {
+                                                       remote-endpoint = 
<&dpu1_intf0_out>;
+                                               };
+                                       };
+
+                                       port@1 {
+                                               reg = <1>;
+
+                                               mdss1_dp0_out: endpoint { };
+                                       };
+                               };
+
+                               mdss1_dp_opp_table: opp-table {
+                                       compatible = "operating-points-v2";
+
+                                       opp-160000000 {
+                                               opp-hz = /bits/ 64 <160000000>;
+                                               required-opps = 
<&rpmhpd_opp_low_svs>;
+                                       };
+
+                                       opp-270000000 {
+                                               opp-hz = /bits/ 64 <270000000>;
+                                               required-opps = 
<&rpmhpd_opp_svs>;
+                                       };
+
+                                       opp-540000000 {
+                                               opp-hz = /bits/ 64 <540000000>;
+                                               required-opps = 
<&rpmhpd_opp_svs_l1>;
+                                       };
+
+                                       opp-810000000 {
+                                               opp-hz = /bits/ 64 <810000000>;
+                                               required-opps = 
<&rpmhpd_opp_nom>;
+                                       };
+                               };
+                       };
+
+                       mdss1_dp1: displayport-controller@2215c000 {
+                               compatible = "qcom,sa8775p-dp";
+
+                               reg = <0x0 0x2215c000 0x0 0x104>,
+                                     <0x0 0x2215c200 0x0 0x0c0>,
+                                     <0x0 0x2215d000 0x0 0x770>,
+                                     <0x0 0x2215e000 0x0 0x09c>,
+                                     <0x0 0x2215f000 0x0 0x09c>,
+                                     <0x0 0x22160000 0x0 0x09c>,
+                                     <0x0 0x22161000 0x0 0x09c>,
+                                     <0x0 0x22162000 0x0 0x23c>,
+                                     <0x0 0x22163000 0x0 0x23c>;
+
+                               interrupt-parent = <&mdss1>;
+                               interrupts = <13>;
+
+                               clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+                                        <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+                               clock-names = "core_iface",
+                                             "core_aux",
+                                             "ctrl_link",
+                                             "ctrl_link_iface",
+                                             "stream_pixel",
+                                             "stream_1_pixel";
+                               assigned-clocks = <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+                                                 <&dispcc1 
MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+                               assigned-clock-parents = <&mdss1_dp1_phy 0>,
+                                                        <&mdss1_dp1_phy 1>,
+                                                        <&mdss1_dp1_phy 1>;
+                               phys = <&mdss1_dp1_phy>;
+                               phy-names = "dp";
+
+                               operating-points-v2 = <&mdss1_dp1_opp_table>;
+                               power-domains = <&rpmhpd SA8775P_MMCX>;
+
+                               #sound-dai-cells = <0>;
+
+                               status = "disabled";
+
+                               ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       port@0 {
+                                               reg = <0>;
+
+                                               mdss1_dp1_in: endpoint {
+                                                       remote-endpoint = 
<&dpu1_intf4_out>;
+                                               };
+                                       };
+
+                                       port@1 {
+                                               reg = <1>;
+
+                                               mdss1_dp1_out: endpoint { };
+                                       };
+                               };
+
+                               mdss1_dp1_opp_table: opp-table {
+                                       compatible = "operating-points-v2";
+
+                                       opp-160000000 {
+                                               opp-hz = /bits/ 64 <160000000>;
+                                               required-opps = 
<&rpmhpd_opp_low_svs>;
+                                       };
+
+                                       opp-270000000 {
+                                               opp-hz = /bits/ 64 <270000000>;
+                                               required-opps = 
<&rpmhpd_opp_svs>;
+                                       };
+
+                                       opp-540000000 {
+                                               opp-hz = /bits/ 64 <540000000>;
+                                               required-opps = 
<&rpmhpd_opp_svs_l1>;
+                                       };
+
+                                       opp-810000000 {
+                                               opp-hz = /bits/ 64 <810000000>;
+                                               required-opps = 
<&rpmhpd_opp_nom>;
+                                       };
+                               };
+                       };
                };
 
                dispcc1: clock-controller@22100000 {
@@ -6872,6 +7115,8 @@ dispcc1: clock-controller@22100000 {
                                 <&rpmhcc RPMH_CXO_CLK>,
                                 <&rpmhcc RPMH_CXO_CLK_A>,
                                 <&sleep_clk>,
+                                <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>,
+                                <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>,
                                 <0>, <0>, <0>, <0>,
                                 <0>, <0>, <0>, <0>;
                        power-domains = <&rpmhpd SA8775P_MMCX>;
-- 
2.34.1

Reply via email to