On Mon, 22 Dec 2025 00:32:12 +0100, Marijn Suijten wrote:
> Document the Samsung SOFEF03-M Display-Driver-IC and 1080x2520@120Hz DSI
> command-mode panels found in the Sony Xperia 5 II and Sony Xperia 5 III.
> It requires Display Stream Compression 1.1 which allows the panels to be
> driven at 120Hz, even though a 60Hz mode is available too.
>
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Marijn Suijten <[email protected]>
> ---
> .../bindings/display/panel/samsung,sofef03-m.yaml | 79
> ++++++++++++++++++++++
> MAINTAINERS | 5 ++
> 2 files changed, 84 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/samsung,sofef01-m.example.dtb:
panel@0 (samsung,sofef01-m-amb609tc01): 'vci-supply' does not match any of the
regexes: '^pinctrl-[0-9]+$'
from schema $id:
http://devicetree.org/schemas/display/panel/samsung,sofef01-m.yaml
doc reference errors (make refcheckdocs):
See
https://patchwork.kernel.org/project/devicetree/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
