DPU units before 4.x don't have a separate CTL_START IRQ to mark the
begin of the data transfer. In such a case, wait for the frame transfer
to complete rather than trying to wait for the CTL_START interrupt (and
obviously hitting the timeout).
Fixes: 050770cbbd26 ("drm/msm/dpu: Fix timeout issues on command mode panels")
Reported-by: Alexey Minnekhanov <[email protected]>
Closes:
https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 0ec6d67c7c70..93db1484f606 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -681,10 +681,11 @@ static int dpu_encoder_phys_cmd_wait_for_commit_done(
if (!dpu_encoder_phys_cmd_is_master(phys_enc))
return 0;
- if (phys_enc->hw_ctl->ops.is_started(phys_enc->hw_ctl))
- return dpu_encoder_phys_cmd_wait_for_tx_complete(phys_enc);
+ if (phys_enc->irq[INTR_IDX_CTL_START] &&
+ !phys_enc->hw_ctl->ops.is_started(phys_enc->hw_ctl))
+ return _dpu_encoder_phys_cmd_wait_for_ctl_start(phys_enc);
- return _dpu_encoder_phys_cmd_wait_for_ctl_start(phys_enc);
+ return dpu_encoder_phys_cmd_wait_for_tx_complete(phys_enc);
}
static void dpu_encoder_phys_cmd_handle_post_kickoff(
--
2.47.3
