Document ovp values supported by wled found in PMI8950.
Signed-off-by: Barnabás Czémán <[email protected]>
---
.../bindings/leds/backlight/qcom-wled.yaml | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index a8490781011d..306fb6642617 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -98,8 +98,6 @@ properties:
description: |
Over-voltage protection limit. This property is for WLED4 only.
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 18100, 19600, 29600, 31100 ]
- default: 29600
qcom,num-strings:
description: |
@@ -239,6 +237,24 @@ allOf:
minimum: 0
maximum: 4095
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pmi8950-wled
+
+ then:
+ properties:
+ qcom,ovp-millivolt:
+ enum: [ 17800, 19400, 29500, 31000 ]
+ default: 29500
+
+ else:
+ properties:
+ qcom,ovp-millivolt:
+ enum: [ 18100, 19600, 29600, 31100 ]
+ default: 29600
+
required:
- compatible
- reg
--
2.52.0
