On Tue, 20 Jan 2026 20:19:29 -0300, Fabio Estevam wrote: > From: Fabio Estevam <[email protected]> > > Document the optional nxp,enable-termination-resistor property for the > i.MX LVDS display bridge. > > This boolean property indicates that the built-in 100 Ohm termination > resistor on the LVDS output is enabled. It is controlled via the HS_EN > bit in the LVDS_CTRL register. Enabling the resistor can improve LVDS > signal quality and may prevent visual artifacts on some boards, but > increases the power consumption. > > Signed-off-by: Fabio Estevam <[email protected]> > --- > Changes since v1: > - Restrict it to i.MX6SX. (Liu Ying) > > .../bindings/display/bridge/fsl,ldb.yaml | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) >
Acked-by: Rob Herring (Arm) <[email protected]>
