Add MDSS/MDP display subsystem for Qualcomm Eliza SoC, being overall a minor revision change against SM8750, but coming with few different components, like different DSI PHY and added HDMI.
The binding does not include HDMI description yet. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- .../bindings/display/msm/qcom,eliza-mdss.yaml | 496 +++++++++++++++++++++ 1 file changed, 496 insertions(+) diff --git a/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml new file mode 100644 index 000000000000..9064b8d3993a --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml @@ -0,0 +1,496 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,eliza-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Eliza SoC Display MDSS + +maintainers: + - Krzysztof Kozlowski <[email protected]> + +description: + Eliza SoC Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU + display controller, DSI and DP interfaces etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,eliza-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,eliza-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,eliza-dp + + "^dsi@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,eliza-dsi-ctrl + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,eliza-dsi-phy-4nm + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dsi-phy-28nm.h> + #include <dt-bindings/clock/qcom,eliza-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,eliza-rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,eliza-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + ranges; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&disp_cc_mdss_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&disp_cc_mdss_mdp_clk>; + + resets = <&disp_cc_mdss_core_bcr>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&mdss_gdsc>; + + iommus = <&apps_smmu 0x800 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,eliza-dpu"; + reg = <0x0ae01000 0x93000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&disp_cc_mdss_ahb_clk>, + <&disp_cc_mdss_mdp_lut_clk>, + <&disp_cc_mdss_mdp_clk>, + <&disp_cc_mdss_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&disp_cc_mdss_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-207000000 { + opp-hz = /bits/ 64 <207000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-417000000 { + opp-hz = /bits/ 64 <417000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-532000000 { + opp-hz = /bits/ 64 <532000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-660000000 { + opp-hz = /bits/ 64 <660000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + dsi@ae94000 { + compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&disp_cc_mdss_byte0_clk>, + <&disp_cc_mdss_byte0_intf_clk>, + <&disp_cc_mdss_pclk0_clk>, + <&disp_cc_mdss_esc0_clk>, + <&disp_cc_mdss_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&disp_cc_esync0_clk>, + <&disp_cc_osc_clk>, + <&disp_cc_mdss_byte0_clk_src>, + <&disp_cc_mdss_pclk0_clk_src>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-140630000 { + opp-hz = /bits/ 64 <140630000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae95000 0x200>, + <0x0ae95200 0x280>, + <0x0ae95500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&disp_cc_mdss_ahb_clk>, + <&bi_tcxo_div2>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vreg_l2b>; + }; + + dsi@ae96000 { + compatible = "qcom,eliza-dsi-ctrl", "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0ae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&disp_cc_mdss_byte1_clk>, + <&disp_cc_mdss_byte1_intf_clk>, + <&disp_cc_mdss_pclk1_clk>, + <&disp_cc_mdss_esc1_clk>, + <&disp_cc_mdss_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&disp_cc_esync1_clk>, + <&disp_cc_osc_clk>, + <&disp_cc_mdss_byte1_clk_src>, + <&disp_cc_mdss_pclk1_clk_src>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus", + "dsi_pll_pixel", + "dsi_pll_byte", + "esync", + "osc", + "byte_src", + "pixel_src"; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + vdda-supply = <&vreg_l4b>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + remote-endpoint = <&panel1_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; + reg = <0x0ae97000 0x200>, + <0x0ae97200 0x280>, + <0x0ae97500 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&disp_cc_mdss_ahb_clk>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdds-supply = <&vreg_l2b>; + }; + + displayport-controller@af54000 { + compatible = "qcom,eliza-dp", "qcom,sm8650-dp"; + reg = <0xaf54000 0x104>, + <0xaf54200 0xc0>, + <0xaf55000 0x770>, + <0xaf56000 0x9c>, + <0xaf57000 0x9c>; + + interrupts-extended = <&mdss 12>; + + clocks = <&disp_cc_mdss_ahb_clk>, + <&disp_cc_mdss_dptx0_aux_clk>, + <&disp_cc_mdss_dptx0_link_clk>, + <&disp_cc_mdss_dptx0_link_intf_clk>, + <&disp_cc_mdss_dptx0_pixel0_clk>, + <&disp_cc_mdss_dptx0_pixel1_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&disp_cc_mdss_dptx0_link_clk_src>, + <&disp_cc_mdss_dptx0_pixel0_clk_src>, + <&disp_cc_mdss_dptx0_pixel1_clk_src>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&dp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + }; + }; + }; + }; + }; -- 2.51.0
