From: Vishnu Saini <[email protected]> Enable DP controllers, DPTX0 and DPTX1 alongside their corresponding PHYs of mdss1 which corresponds to eDP2 and eDP3.
Signed-off-by: Vishnu Saini <[email protected]> Signed-off-by: Mani Chandana Ballary Kuntumalla <[email protected]> --- .../dts/qcom/lemans-evk-ifp-mezzanine.dtso | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso index 268fc6b05d4b..44bd9b1a1765 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/lemans-evk-ifp-mezzanine.dtso @@ -11,6 +11,30 @@ &{/} { model = "Qualcomm Technologies, Inc. Lemans-evk IFP Mezzanine"; + dp2-connector { + compatible = "dp-connector"; + label = "eDP2"; + type = "full-size"; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "eDP3"; + type = "full-size"; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_out>; + }; + }; + }; + vreg_0p9: regulator-0v9 { compatible = "regulator-fixed"; regulator-name = "VREG_0P9"; @@ -141,6 +165,44 @@ mac_addr1: mac-addr@0 { }; }; +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + pinctrl-0 = <&dp2_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp1 { + pinctrl-0 = <&dp3_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss1_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp2_connector_in>; +}; + +&mdss1_dp1_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp3_connector_in>; +}; + +&mdss1_dp0_phy { + status = "okay"; +}; + +&mdss1_dp1_phy { + status = "okay"; +}; + &pcie0 { iommu-map = <0x0 &pcie_smmu 0x0 0x1>, <0x100 &pcie_smmu 0x1 0x1>, @@ -235,6 +297,18 @@ &serdes1 { }; &tlmm { + dp2_hot_plug_det: dp2-hot-plug-det-state { + pins = "gpio104"; + function = "edp2_hot"; + bias-disable; + }; + + dp3_hot_plug_det: dp3-hot-plug-det-state { + pins = "gpio103"; + function = "edp3_hot"; + bias-disable; + }; + ethernet1_default: ethernet1-default-state { ethernet1-mdc-pins { pins = "gpio20"; -- 2.34.1
