Hi, Some nitpicks below. I know you're just restoring the original code, but if we improve it we can as well do it now.
On Thu, March 10, 2011 14:02, Takashi Iwai wrote: > This reverts commit 951f3512dba5bd44cda3e5ee22b4b522e4bb09fb > > drm/i915: Do not handle backlight combination mode specially > > since this commit introduced other regressions due to untouched LBPC > register, e.g. the backlight dimmed after resume. The regression was that, if ALSE was used, the maximum brightness would be the brightness at boot, because LBPC isn't touched and the BIOS restores it at boot. So the sympom would be less brightness levels or lower maximum brightness. Systems with no ASLE support work fine because there the code is only used to save and restore the PWM register. LBPC is saved and restored by the BIOS. The backlight dimming after resume/blanking was the original bug caused by the bogus val <<=1 shift. > In addition to the revert, this patch includes a fix for the original > issue (weird backlight levels) by removing the wrong bit shift for > computing the current backlight level. > Also, including typo fixes (lpbc -> lbpc). > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524 > Acked-by: Indan Zupancic <indan at nul.nu> > Cc: <stable at kernel.org> > Signed-off-by: Takashi Iwai <tiwai at suse.de> > --- > drivers/gpu/drm/i915/i915_reg.h | 10 ++++++++++ > drivers/gpu/drm/i915/intel_panel.c | 36 > ++++++++++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+), 0 deletions(-) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index 3e6f486..2abe240 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -1553,7 +1553,17 @@ > > /* Backlight control */ > #define BLC_PWM_CTL 0x61254 > +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) This one isn't used anywhere. > #define BLC_PWM_CTL2 0x61250 /* 965+ only */ > +#define BLM_COMBINATION_MODE (1 << 30) > +/* > + * This is the most significant 15 bits of the number of backlight cycles in > a > + * complete cycle of the modulated backlight control. > + * > + * The actual value is this field multiplied by two. > + */ > +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) This one isn't used and the comment is misleading, I think. > +#define BLM_LEGACY_MODE (1 << 16) > /* > * This is the number of cycles out of the backlight modulation cycle for > which > * the backlight is on. > diff --git a/drivers/gpu/drm/i915/intel_panel.c > b/drivers/gpu/drm/i915/intel_panel.c > index d860abe..f8f86e5 100644 > --- a/drivers/gpu/drm/i915/intel_panel.c > +++ b/drivers/gpu/drm/i915/intel_panel.c > @@ -30,6 +30,8 @@ > > #include "intel_drv.h" > > +#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */ > + I'd either put all the defines in i915_reg.h, or have all combination mode specific defines here. Though I guess LBPC is an odd one. > void > intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, > struct drm_display_mode *adjusted_mode) > @@ -110,6 +112,19 @@ done: > dev_priv->pch_pf_size = (width << 16) | height; > } > > +static int is_backlight_combination_mode(struct drm_device *dev) > +{ > + struct drm_i915_private *dev_priv = dev->dev_private; > + > + if (INTEL_INFO(dev)->gen >= 4) > + return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE; > + > + if (IS_GEN2(dev)) > + return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE; > + > + return 0; > +} > + > static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv) > { > u32 val; > @@ -166,6 +181,9 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) > if (INTEL_INFO(dev)->gen < 4) > max &= ~1; I'd add a comment that this is to clear the BLM_LEGACY_MODE bit. > } > + > + if (is_backlight_combination_mode(dev)) > + max *= 0xff; > } > > DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max); > @@ -183,6 +201,14 @@ u32 intel_panel_get_backlight(struct drm_device *dev) > val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; > if (IS_PINEVIEW(dev)) > val >>= 1; > + > + if (is_backlight_combination_mode(dev)){ > + u8 lbpc; > + > + val &= ~1; > + pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); > + val *= lbpc; > + } > } > > DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); > @@ -205,6 +231,16 @@ void intel_panel_set_backlight(struct drm_device *dev, > u32 level) > > if (HAS_PCH_SPLIT(dev)) > return intel_pch_panel_set_backlight(dev, level); > + > + if (is_backlight_combination_mode(dev)){ > + u32 max = intel_panel_get_max_backlight(dev); > + u8 lbpc; > + > + lbpc = level * 0xfe / max + 1; > + level /= lbpc; > + pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc); > + } > + > tmp = I915_READ(BLC_PWM_CTL); > if (IS_PINEVIEW(dev)) { > tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1); After this patch, combined with my new patch "drm/i915: Fix DPMS and suspend interaction for intel_panel.c" all known backlight problems should be fixed. Greetings, Indan