The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.

Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.

Signed-off-by: Johan Hovold <[email protected]>
---
 drivers/gpu/drm/mediatek/mtk_hdmi_common.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c 
b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
index a049489daa2d..042b98e5a519 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_common.c
@@ -290,6 +290,13 @@ static int mtk_hdmi_get_cec_dev(struct mtk_hdmi *hdmi, 
struct device *dev, struc
        return 0;
 }
 
+static void mtk_hdmi_put_adapter(void *_adap)
+{
+       struct i2c_adapter *adap = _adap;
+
+       i2c_put_adapter(adap);
+}
+
 static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, struct 
platform_device *pdev,
                                   const char * const *clk_names, size_t 
num_clocks)
 {
@@ -328,12 +335,12 @@ static int mtk_hdmi_dt_parse_pdata(struct mtk_hdmi *hdmi, 
struct platform_device
        if (!i2c_np)
                return dev_err_probe(dev, -EINVAL, "No ddc-i2c-bus in 
connector\n");
 
-       hdmi->ddc_adpt = of_find_i2c_adapter_by_node(i2c_np);
+       hdmi->ddc_adpt = of_get_i2c_adapter_by_node(i2c_np);
        of_node_put(i2c_np);
        if (!hdmi->ddc_adpt)
                return dev_err_probe(dev, -EPROBE_DEFER, "Failed to get ddc i2c 
adapter by node\n");
 
-       ret = devm_add_action_or_reset(dev, mtk_hdmi_put_device, 
&hdmi->ddc_adpt->dev);
+       ret = devm_add_action_or_reset(dev, mtk_hdmi_put_adapter, 
hdmi->ddc_adpt);
        if (ret)
                return ret;
 
-- 
2.54.0

Reply via email to