On Thu, Aug 06, 2026 at 03:17:08PM +0200, Philipp Zabel wrote: > With these fixes > > Tested-by: Philipp Zabel <[email protected]> > > on RK3576 with a 1080p60 panel @ 148.5 MHz. > > Feel free to squash any of these into v7. Thank you for the fixes will use most of them in next revison. > regards > Philipp > > Oleksij Rempel (1): > drm/bridge: lt9211: Enable DSI burst mode for LT9211C This fix will be included in the next revision. > Philipp Zabel (6): > drm/bridge: lt9211: drop delayed work This patch is not working autodetect failed to read format/width/height. 1. Tried ading more delay upto 5s before, autodetect did not help. 2. Tried adding a dummy drm_hook hw_timing_enabled, which is called after enabling the timing engine with this synchronous approach is working. In the next revision i will be keeping delayed work apprach with some improvements, by reducing the delay to minimum and wait in autect_rx for correct nonzero format/width/height. Let me know if this is ok, or if any alternative approach i should follow?
> drm/bridge: lt9211: fix regmap_write error handling This fix will be included in the next revision. > drm/bridge: lt9211: use regmap_write_bits This fix will be included in the next revision. > drm/bridge: lt9211: reuse lt9211_configure_timing in > lt9211c_configure_timing This fix will be included in the next revision. > drm/bridge: lt9211: combine equal branches This fix will be included in the next revision. > drm/bridge: lt9211: use devm_drm_bridge_add and drop lt9211_remove This fix will be included in the next revision. > drivers/gpu/drm/bridge/lontium-lt9211.c | 189 ++++++++---------------- > 1 file changed, 61 insertions(+), 128 deletions(-) > > -- > 2.47.3 >
