Configure and enable nodes for PMK8350 on the Xperia 10 III.
Signed-off-by: erebion <[email protected]>
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 08ad5613cb6de..0f0e81683f2e5 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -8,7 +8,11 @@
#define PM7250B_SID 2
#define PM7250B_SID1 3
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -16,6 +20,7 @@
#include "pm6150l.dtsi"
#include "pm6350.dtsi"
#include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
/ {
model = "Sony Xperia 10 III";
@@ -425,6 +430,31 @@ &pm7250b_vbus {
status = "okay";
};
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,ratiometric;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ channel@644 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "xo_therm";
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
--
2.53.0
