From: Francesco Dolcini <[email protected]> This series adds support for the Thine THC63LVD827 DPI to LVDS encoder and afterward uses it to add DT overlays to enable the Toradex 10inch LVDS panel on Colibri iMX6ULL / iMX7 with the Iris v2 carrier board.
v2: - address review comment on the binding (Frank), document the power supplies - driver: add power supplies support, enforce the input sampling edge via atomic_check, use bridge.next_bridge with of_drm_get_bridge_by_endpoint(), drop unused code - move the common part of the Colibri iMX7 overlay to a dtsi shared between Colibri iMX6ULL and iMX7, minor cleanups to the overlay and the Makefile - new patch adding the Colibri iMX6ULL overlay v1: https://lore.kernel.org/all/[email protected]/ Francesco Dolcini (4): dt-bindings: display: bridge: Add THine THC63LVD827 drm/bridge: Add THine THC63LVD827 LVDS encoder ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 10" LVDS ARM: dts: imx6ull-colibri-emmc: Add Toradex Capacitive Touch Display 10" LVDS .../display/bridge/thine,thc63lvd827.yaml | 138 +++++++++++ MAINTAINERS | 6 + arch/arm/boot/dts/nxp/imx/Makefile | 13 + ...emmc-iris-panel-cap-touch-10inch-lvds.dtso | 49 ++++ ...ibri-iris-panel-cap-touch-10inch-lvds.dtsi | 70 ++++++ ...emmc-iris-panel-cap-touch-10inch-lvds.dtso | 47 ++++ drivers/gpu/drm/bridge/Kconfig | 11 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/thc63lvd827.c | 228 ++++++++++++++++++ 9 files changed, 563 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd827.yaml create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-colibri-emmc-iris-panel-cap-touch-10inch-lvds.dtso create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-imx7-colibri-iris-panel-cap-touch-10inch-lvds.dtsi create mode 100644 arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc-iris-panel-cap-touch-10inch-lvds.dtso create mode 100644 drivers/gpu/drm/bridge/thc63lvd827.c -- 2.47.3
