On Fri, Oct 16, 2026 at 02:09:15PM -0600, Zack McKevitt wrote:
>
>
> On 10/14/2026 3:11 PM, Rodrigo Vivi wrote:
> > On Fri, Oct 09, 2026 at 10:31:51AM -0700, Zack McKevitt wrote:
> > > Add a new node type, attribute set, and doit function for performing
> > > telemetry read and write operations using the DRM RAS interface.
> >
> > Hi Zack,
> >
> > I'm glad to see more users of drm-ras and glad that the flexibility is
> > paying of
> >
> > >
> > > Signed-off-by: Zack McKevitt <[email protected]>
> > > ---
> > > Documentation/netlink/specs/drm_ras.yaml | 55 ++++++-
> > > drivers/gpu/drm/drm_ras.c | 193 ++++++++++++++++++++++-
> > > drivers/gpu/drm/drm_ras_nl.c | 29 ++++
> > > drivers/gpu/drm/drm_ras_nl.h | 6 +
> > > include/drm/drm_ras.h | 39 +++++
> > > include/uapi/drm/drm_ras.h | 14 ++
> >
> > just to confirm, you used ynl to generate these most of these files right?
> > Please make sure to mention in the commit message so we are sure.
> >
>
> Correct, ill add a note in the commit in the v2.
>
> > > 6 files changed, 327 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/Documentation/netlink/specs/drm_ras.yaml
> > > b/Documentation/netlink/specs/drm_ras.yaml
> > > index a88fdab7a1c7..d558eb1cba3f 100644
> > > --- a/Documentation/netlink/specs/drm_ras.yaml
> > > +++ b/Documentation/netlink/specs/drm_ras.yaml
> > > @@ -16,7 +16,7 @@ definitions:
> > > type: enum
> > > name: node-type
> > > value-start: 1
> > > - entries: [error-counter]
> > > + entries: [error-counter, telemetry]
> > > doc: >-
> > > Type of the node. Currently, only error-counter nodes are
> >
> > Please ensure that the doc is also updated.
> >
>
> Will do.
>
> > > supported, which expose reliability counters for a
> > > hardware/software
> > > @@ -100,6 +100,31 @@ attribute-sets:
> > > name: error-value
> > > type: u32
> > > doc: Current value of the error counter.
> > > + -
> > > + name: telemetry-attrs
> > > + attributes:
> > > + -
> > > + name: node-id
> > > + type: u32
> > > + doc: >-
> > > + Unique identifier for the node.
> > > + Assigned dynamically by the DRM RAS core upon registration.
> > > + -
> > > + name: field
> > > + type: u32
> > > + doc: Telemetry field to be read/written, e.g., SoC temp.
> > > + -
> > > + name: value
> > > + type: u64
> > > + doc: Value of telemetry field that was read/written.
> > > + -
> > > + name: status
> > > + type: s32
> > > + doc: Status of the telemetry operation.
> >
> > is this status the hardware itself that is giving?
> > Please add some doc around it to help us understand the need and see if
> > is generic enough and mandatory vs optional.
> >
>
> Yes, it is a hardware status. I will add a more in depth doc for this in the
> next iteration.
>
> > > + -
> > > + name: pad
> > > + type: pad
> > > + doc: Alignment padding used for 64-bit
> > > operations:
> > > list:
> > > @@ -198,6 +223,34 @@ operations:
> > > - node-id
> > > - error-id
> > > - error-threshold
> > > + -
> > > + name: telemetry-read
> >
> > should we do get_/set_ instead of read/write to align with the existing
> > entries?!
> >
>
> Sure, will do.
>
> > > + doc: Perform a read of the specified telemetry field.
> > > + attribute-set: telemetry-attrs
> > > + do:
> > > + pre: drm-ras-nl-pre-telemetry
> > > + request:
> > > + attributes:
> > > + - node-id
> > > + - field
> >
> > how do users know what field to read?
> > Why not a dump or at least a dump field for field discovery?
> >
>
> We define the set of fields for our devices in our uapi file qaic_accel.h,
> but I think a dump is probably a good idea here.
>
> > > + reply:
> > > + attributes:
> > > + - value
> > > + - status
> > > + -
> > > + name: telemetry-write
> > > + doc: Perform a write of the specified telemetry field.
> >
> > what is a write telemetry operation?
>
> Our device has certain fields that are writable, e.g.,
> QAIC_DEVINFO_THERMAL_WARNING_TEMP where the host is able to modify the
> device's thermal warning temperature threshold. These make up a small subset
> of telemetry fields.
I see... I believe this aligns well with the error-threshold...
perhaps we need a set/get threshold that is independent of your
actual telemetry get?!
>
> > can we make this optional?
> >
>
> Sure, I will make it optional in the v2.
>
> > even write is allowed without admin cap?
> >
>
> It seems like all of our existing writable telemetry fields should be
> restricted to admin cap only, so I will add the admin cap back in for this.
>
> > > + attribute-set: telemetry-attrs
> > > + do:
> > > + pre: drm-ras-nl-pre-telemetry
> > > + request:
> > > + attributes:
> > > + - node-id
> > > + - field
> > > + - value
> > > + reply:
> > > + attributes:
> > > + - status
> > > mcast-groups:
> > > list:
> > > diff --git a/drivers/gpu/drm/drm_ras.c b/drivers/gpu/drm/drm_ras.c
> > > index b099eb67836e..b88293295cda 100644
> > > --- a/drivers/gpu/drm/drm_ras.c
> > > +++ b/drivers/gpu/drm/drm_ras.c
> > > @@ -53,6 +53,15 @@
> > > * 7. SET_ERROR_THRESHOLD: Set error threshold of a given counter.
> > > * Userspace must provide Node ID, Error ID and threshold to be set.
> > > *
> > > + * 8. TELEMETRY_READ: Read a telemetry value.
> > > + * Userspace must provide Node ID and telemetry field to be read.
> > > + * Returns the status of the read and the value read (if valid).
> > > + *
> > > + * 9. TELEMETRY_WRITE: Write a telemetry value.
> > > + * Userspace must provide Node ID, the telemetry field to write, and
> > > the value
> > > + * to be written.
> > > + * Returns the status of the write.
> > > + *
> > > * Node registration:
> > > *
> > > * - drm_ras_node_register(): Registers a new node and assigns
> > > @@ -63,7 +72,6 @@
> > > * Node type:
> > > *
> > > * - ERROR_COUNTER:
> > > - * + Currently, only error counters are supported.
> > > * + The driver must implement the query_error_counter() callback
> > > to provide
> > > * the name and the value of the error counter.
> > > * + The driver must provide a error_counter_range.last value
> > > informing the
> > > @@ -81,6 +89,12 @@
> > > * that are raised by the hardware.
> > > * + The driver is responsible for error threshold bounds checking.
> > > *
> > > + * - TELEMETRY:
> > > + * + The driver must implement the telemetry_read() and
> > > telemetry_write()
> > > + * callbacks.
> > > + * + The driver can optionally provide a pre_doit callback,
> > > telemetry_pre(),
> > > + * to enforce permissions checks on telemetry operations.
> > > + *
> > > * Netlink handlers:
> > > *
> > > * - drm_ras_nl_list_nodes_dumpit(): Implements the LIST_NODES
> > > @@ -95,6 +109,12 @@
> > > * operation, fetching the error threshold of a specific counter.
> > > * - drm_ras_nl_set_error_threshold_doit(): Implements the
> > > SET_ERROR_THRESHOLD doit
> > > * operation, setting the error threshold of a specific counter.
> > > + * - drm_ras_nl_pre_telemetry(): Implements the TELEMETRY_READ and
> > > TELEMETRY_WRITE
> > > + * pre_doit operation, returning 0 if valid.
> > > + * - drm_ras_nl_telemetry_read_doit(): Implements the TELEMETRY_READ
> > > doit operation,
> > > + * invoking the driver's telemetry_read callback and returning the
> > > results.
> > > + * - drm_ras_nl_telemetry_write_doit(): Implements the TELEMETRY_WRITE
> > > doit operation,
> > > + * invoking the driver's telemetry_write callback and returning the
> > > results.
> > > */
> > > static DEFINE_XARRAY_ALLOC(drm_ras_xa);
> > > @@ -617,6 +637,156 @@ int drm_ras_nl_set_error_threshold_doit(struct
> > > sk_buff *skb, struct genl_info *i
> > > return set_node_error_threshold(node_id, error_id, threshold);
> > > }
> > > +/**
> > > + * drm_ras_nl_pre_telemetry - Enforce permission checks
> > > + * @ops: Generic netlink operations
> > > + * @skb: Netlink message buffer
> > > + * @info: Generic Netlink info containing attributes of the request
> > > + *
> > > + * Enforces a telemetry node's pre_doit conditions (if they exist).
> > > + *
> > > + * Returns 0 if no pre_doit is specified, otherwise returns the pre_doit.
> > > + */
> > > +int drm_ras_nl_pre_telemetry(const struct genl_split_ops *ops, struct
> > > sk_buff *skb,
> > > + struct genl_info *info)
> > > +{
> > > + struct drm_ras_node *node;
> > > + u32 node_id;
> > > +
> > > + node_id = nla_get_u32(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID]);
> > > + node = xa_load(&drm_ras_xa, node_id);
> > > +
> > > + if (node->telemetry_pre)
> > > + return node->telemetry_pre(node);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * drm_ras_nl_telemetry_read_doit() - Query a telemetry value
> > > + * @skb: Netlink message buffer
> > > + * @info: Generic Netlink info containing attributes of the request
> > > + *
> > > + * Extracts the telemetry field from the netlink attributes and
> > > + * reads that value from the device.
> > > + *
> > > + * Return: 0 on success, or negative errno on failure.
> > > + */
> > > +int drm_ras_nl_telemetry_read_doit(struct sk_buff *skb, struct genl_info
> > > *info)
> > > +{
> > > + struct drm_ras_node *node;
> > > + struct sk_buff *msg;
> > > + struct nlattr *hdr;
> > > + u32 node_id, field;
> > > + s32 status;
> > > + u64 value;
> > > + int ret;
> > > +
> > > + if (!info->attrs || !info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_FIELD])
> > > + return -EINVAL;
> > > +
> > > + field = nla_get_u32(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_FIELD]);
> > > + node_id = nla_get_u32(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID]);
> > > +
> > > + node = xa_load(&drm_ras_xa, node_id);
> > > + if (!node || !node->telemetry_read)
> > > + return -ENOENT;
> > > +
> > > + msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
> > > + if (!msg)
> > > + return -ENOMEM;
> > > +
> > > + hdr = genlmsg_iput(msg, info);
> > > + if (!hdr) {
> > > + nlmsg_free(msg);
> > > + return -EMSGSIZE;
> > > + }
> > > +
> > > + ret = node->telemetry_read(node, &field, &value, &status);
> > > + if (ret) {
> > > + nlmsg_free(msg);
> > > + return ret;
> > > + }
> > > +
> > > + ret = nla_put_s32(msg, DRM_RAS_A_TELEMETRY_ATTRS_STATUS, status);
> > > + if (ret) {
> > > + genlmsg_cancel(msg, hdr);
> > > + nlmsg_free(msg);
> > > + return ret;
> > > + }
> > > +
> > > + ret = nla_put_64bit(msg, DRM_RAS_A_TELEMETRY_ATTRS_VALUE, sizeof(value),
> > > + &value, DRM_RAS_A_TELEMETRY_ATTRS_PAD);
> > > + if (ret) {
> > > + genlmsg_cancel(msg, hdr);
> > > + nlmsg_free(msg);
> > > + return ret;
> > > + }
> > > +
> > > + genlmsg_end(msg, hdr);
> > > +
> > > + return genlmsg_reply(msg, info);
> > > +}
> > > +
> > > +/**
> > > + * drm_ras_nl_telemetry_write_doit() - Write a telemetry value
> > > + * @skb: Netlink message buffer
> > > + * @info: Generic Netlink info containing attributes of the request
> > > + *
> > > + * Extracts the telemetry field and value to be written from the netlink
> > > + * attributes and writes that value to the specified field on the device.
> > > + *
> > > + * Return: 0 on success, or negative errno on failure.
> > > + */
> > > +int drm_ras_nl_telemetry_write_doit(struct sk_buff *skb, struct
> > > genl_info *info)
> > > +{
> > > + struct drm_ras_node *node;
> > > + struct sk_buff *msg;
> > > + struct nlattr *hdr;
> > > + u32 node_id, field;
> > > + s32 status;
> > > + u64 value;
> > > + int ret;
> > > +
> > > + if (!info->attrs || !info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_FIELD])
> > > + return -EINVAL;
> > > +
> > > + value = nla_get_u64(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_VALUE]);
> > > + field = nla_get_u32(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_FIELD]);
> > > + node_id = nla_get_u32(info->attrs[DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID]);
> > > +
> > > + node = xa_load(&drm_ras_xa, node_id);
> > > + if (!node || !node->telemetry_read)
> > > + return -ENOENT;
> > > +
> > > + msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
> > > + if (!msg)
> > > + return -ENOMEM;
> > > +
> > > + hdr = genlmsg_iput(msg, info);
> > > + if (!hdr) {
> > > + nlmsg_free(msg);
> > > + return -EMSGSIZE;
> > > + }
> > > +
> > > + ret = node->telemetry_write(node, &field, &value, &status);
> > > + if (ret) {
> > > + nlmsg_free(msg);
> > > + return ret;
> > > + }
> > > +
> > > + ret = nla_put_s32(msg, DRM_RAS_A_TELEMETRY_ATTRS_STATUS, status);
> > > + if (ret) {
> > > + genlmsg_cancel(msg, hdr);
> > > + nlmsg_free(msg);
> > > + return ret;
> > > + }
> > > +
> > > + genlmsg_end(msg, hdr);
> > > +
> > > + return genlmsg_reply(msg, info);
> > > +}
> > > +
> > > /**
> > > * drm_ras_node_register() - Register a new RAS node
> > > * @node: Node structure to register
> > > @@ -631,14 +801,21 @@ int drm_ras_node_register(struct drm_ras_node *node)
> > > if (!node->device_name || !node->node_name)
> > > return -EINVAL;
> > > - /* Currently, only Error Counter Endpoints are supported */
> > > - if (node->type != DRM_RAS_NODE_TYPE_ERROR_COUNTER)
> > > - return -EINVAL;
> > > -
> > > - /* Mandatory entries for Error Counter Node */
> > > - if (node->type == DRM_RAS_NODE_TYPE_ERROR_COUNTER &&
> > > - (!node->error_counter_range.last || !node->query_error_counter))
> > > + /* Currently, only Error Counter and Telemetry endpoints are supported
> > > */
> > > + switch (node->type) {
> > > + case DRM_RAS_NODE_TYPE_ERROR_COUNTER:
> > > + /* Mandatory entries for Error Counter Node */
> > > + if (!node->error_counter_range.last ||
> > > !node->query_error_counter)
> > > + return -EINVAL;
> > > + break;
> > > + case DRM_RAS_NODE_TYPE_TELEMETRY:
> > > + /* Mandatory entries for Telemetry Node */
> > > + if (!node->telemetry_read || !node->telemetry_write)
> > > + return -EINVAL;
> > > + break;
> > > + default:
> > > return -EINVAL;
> > > + }
> > > return xa_alloc(&drm_ras_xa, &node->id, node, xa_limit_32b,
> > > GFP_KERNEL);
> > > }
> > > diff --git a/drivers/gpu/drm/drm_ras_nl.c b/drivers/gpu/drm/drm_ras_nl.c
> > > index ff0dc406c27c..4577bc1a333e 100644
> > > --- a/drivers/gpu/drm/drm_ras_nl.c
> > > +++ b/drivers/gpu/drm/drm_ras_nl.c
> > > @@ -41,6 +41,19 @@ static const struct nla_policy
> > > drm_ras_set_error_threshold_nl_policy[DRM_RAS_A_E
> > > [DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_THRESHOLD] = { .type =
> > > NLA_U32, },
> > > };
> > > +/* DRM_RAS_CMD_TELEMETRY_READ - do */
> > > +static const struct nla_policy
> > > drm_ras_telemetry_read_nl_policy[DRM_RAS_A_TELEMETRY_ATTRS_FIELD + 1] = {
> > > + [DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID] = { .type = NLA_U32, },
> > > + [DRM_RAS_A_TELEMETRY_ATTRS_FIELD] = { .type = NLA_U32, },
> > > +};
> > > +
> > > +/* DRM_RAS_CMD_TELEMETRY_WRITE - do */
> > > +static const struct nla_policy
> > > drm_ras_telemetry_write_nl_policy[DRM_RAS_A_TELEMETRY_ATTRS_VALUE + 1] = {
> > > + [DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID] = { .type = NLA_U32, },
> > > + [DRM_RAS_A_TELEMETRY_ATTRS_FIELD] = { .type = NLA_U32, },
> > > + [DRM_RAS_A_TELEMETRY_ATTRS_VALUE] = { .type = NLA_U64, },
> > > +};
> > > +
> > > /* Ops table for drm_ras */
> > > static const struct genl_split_ops drm_ras_nl_ops[] = {
> > > {
> > > @@ -83,6 +96,22 @@ static const struct genl_split_ops drm_ras_nl_ops[] = {
> > > .maxattr =
> > > DRM_RAS_A_ERROR_COUNTER_ATTRS_ERROR_THRESHOLD,
> > > .flags = GENL_ADMIN_PERM | GENL_CMD_CAP_DO,
> > > },
> > > + {
> > > + .cmd = DRM_RAS_CMD_TELEMETRY_READ,
> > > + .pre_doit = drm_ras_nl_pre_telemetry,
> > > + .doit = drm_ras_nl_telemetry_read_doit,
> > > + .policy = drm_ras_telemetry_read_nl_policy,
> > > + .maxattr = DRM_RAS_A_TELEMETRY_ATTRS_FIELD,
> > > + .flags = GENL_CMD_CAP_DO,
> > > + },
> > > + {
> > > + .cmd = DRM_RAS_CMD_TELEMETRY_WRITE,
> > > + .pre_doit = drm_ras_nl_pre_telemetry,
> > > + .doit = drm_ras_nl_telemetry_write_doit,
> > > + .policy = drm_ras_telemetry_write_nl_policy,
> > > + .maxattr = DRM_RAS_A_TELEMETRY_ATTRS_VALUE,
> > > + .flags = GENL_CMD_CAP_DO,
> > > + },
> > > };
> > > static const struct genl_multicast_group drm_ras_nl_mcgrps[] = {
> > > diff --git a/drivers/gpu/drm/drm_ras_nl.h b/drivers/gpu/drm/drm_ras_nl.h
> > > index 9aef097ea10f..4bdd7ed268a1 100644
> > > --- a/drivers/gpu/drm/drm_ras_nl.h
> > > +++ b/drivers/gpu/drm/drm_ras_nl.h
> > > @@ -12,6 +12,9 @@
> > > #include <uapi/drm/drm_ras.h>
> > > +int drm_ras_nl_pre_telemetry(const struct genl_split_ops *ops,
> > > + struct sk_buff *skb, struct genl_info *info);
> > > +
> > > int drm_ras_nl_list_nodes_dumpit(struct sk_buff *skb,
> > > struct netlink_callback *cb);
> > > int drm_ras_nl_get_error_counter_doit(struct sk_buff *skb,
> > > @@ -24,6 +27,9 @@ int drm_ras_nl_get_error_threshold_doit(struct sk_buff
> > > *skb,
> > > struct genl_info *info);
> > > int drm_ras_nl_set_error_threshold_doit(struct sk_buff *skb,
> > > struct genl_info *info);
> > > +int drm_ras_nl_telemetry_read_doit(struct sk_buff *skb, struct genl_info
> > > *info);
> > > +int drm_ras_nl_telemetry_write_doit(struct sk_buff *skb,
> > > + struct genl_info *info);
> > > enum {
> > > DRM_RAS_NLGRP_ERROR_REPORT,
> > > diff --git a/include/drm/drm_ras.h b/include/drm/drm_ras.h
> > > index 1765a3130b09..2a2cdd44839d 100644
> > > --- a/include/drm/drm_ras.h
> > > +++ b/include/drm/drm_ras.h
> > > @@ -100,6 +100,45 @@ struct drm_ras_node {
> > > */
> > > int (*set_error_threshold)(struct drm_ras_node *node, u32
> > > error_id, u32 threshold);
> > > + /**
> > > + * @telemetry_pre:
> > > + *
> > > + * This callback is used to enforce any pre_doit conditions necessary
> > > + * for telemetry. This is an optional callback for telemetry_node.
> > > + *
> > > + * Returns 0 on success, negative error code on failure.
> > > + */
> > > + int (*telemetry_pre)(struct drm_ras_node *ep);
> > > +
> > > + /**
> > > + * @telemetry_read:
> > > + *
> > > + * This callback is used for a drm-ras telemetry node to read a
> > > + * telemetry value. This is a mandatory callback for telemetry_node.
> > > + *
> > > + * The callback will read the desired device-specific field into value
> > > + * and update status corresponding to a device-specific error code.
> > > + *
> > > + * Returns 0 on success, negative error code on failure.
> > > + */
> > > + int (*telemetry_read)(struct drm_ras_node *ep, u32 *field, u64 *value,
> > > + s32 *status);
> > > +
> > > + /**
> > > + * @telemetry_write:
> > > + *
> > > + * This callback is used for a drm-ras telemetry node to write a
> > > + * telemetry value. This is a mandatory callback for telemetry_node.
> > > + *
> > > + * The callback will write the value to the desired device-specific
> > > + * field and update status corresponding to a device-specific error
> > > + * code.
> > > + *
> > > + * Returns 0 on success, negative error code on failure.
> > > + */
> > > + int (*telemetry_write)(struct drm_ras_node *ep, u32 *field, u64 *value,
> > > + s32 *status);
> > > +
> > > /** @priv: Driver private data */
> > > void *priv;
> > > };
> > > diff --git a/include/uapi/drm/drm_ras.h b/include/uapi/drm/drm_ras.h
> > > index 2f832275ee6e..d39c78a9ed5a 100644
> > > --- a/include/uapi/drm/drm_ras.h
> > > +++ b/include/uapi/drm/drm_ras.h
> > > @@ -16,6 +16,7 @@
> > > */
> > > enum drm_ras_node_type {
> > > DRM_RAS_NODE_TYPE_ERROR_COUNTER = 1,
> > > + DRM_RAS_NODE_TYPE_TELEMETRY,
> > > };
> > > enum {
> > > @@ -51,6 +52,17 @@ enum {
> > > DRM_RAS_A_ERROR_EVENT_ATTRS_MAX =
> > > (__DRM_RAS_A_ERROR_EVENT_ATTRS_MAX - 1)
> > > };
> > > +enum {
> > > + DRM_RAS_A_TELEMETRY_ATTRS_NODE_ID = 1,
> > > + DRM_RAS_A_TELEMETRY_ATTRS_FIELD,
> > > + DRM_RAS_A_TELEMETRY_ATTRS_VALUE,
> > > + DRM_RAS_A_TELEMETRY_ATTRS_STATUS,
> > > + DRM_RAS_A_TELEMETRY_ATTRS_PAD,
> > > +
> > > + __DRM_RAS_A_TELEMETRY_ATTRS_MAX,
> > > + DRM_RAS_A_TELEMETRY_ATTRS_MAX = (__DRM_RAS_A_TELEMETRY_ATTRS_MAX - 1)
> > > +};
> > > +
> > > enum {
> > > DRM_RAS_CMD_LIST_NODES = 1,
> > > DRM_RAS_CMD_GET_ERROR_COUNTER,
> > > @@ -58,6 +70,8 @@ enum {
> > > DRM_RAS_CMD_ERROR_EVENT,
> > > DRM_RAS_CMD_GET_ERROR_THRESHOLD,
> > > DRM_RAS_CMD_SET_ERROR_THRESHOLD,
> > > + DRM_RAS_CMD_TELEMETRY_READ,
> > > + DRM_RAS_CMD_TELEMETRY_WRITE,
> > > __DRM_RAS_CMD_MAX,
> > > DRM_RAS_CMD_MAX = (__DRM_RAS_CMD_MAX - 1)
> > > --
> > > 2.43.0
> > >
>
