On Sun, Nov 1, 2026 at 9:31 AM Jiaxing Hu <[email protected]> wrote: > > This adds the RK3576 NPU to accel/rocket. > > v15 is v14 rebased onto next-20261030. v14's 12/15 no longer applied > there, because Sidong Yang's regcmd validation added two defines in the > spot where 12/15 adds its own. Nothing else changed, and the tags carry > over. > > Leonard Lausen has the series running on a NanoPi M5 and posted a board > patch on top of it: > https://lore.kernel.org/all/[email protected]/ > > On Sashiko's two points about v14 9/15, I measured a CM5-IO. U-Boot > hands over with the NPU domains on, and the power domain driver still > probes. The NPU QoS is saved before its first power-on, so it is not > zeroed. The domain whose QoS does get zeroed is the GPU, on mainline > without this series, and that fix went out on its own: > https://lore.kernel.org/all/[email protected]/ > > 1/15 is the patch that carries Igor Paunovic's name. It is also part > of his DVFS series, so whichever lands first, the other drops it. > > Ulf offered to take 7, 9 and 10. 1 to 5, 11 and 12 go through accel, > and 13 to 15 through rockchip. 15/15 needs 9, 10 and 12 to 14 first. > Without 9, 10 and 13, the ROCK 4D takes an SError at boot when the NPU > domain powers on. > > Link to v14: > https://lore.kernel.org/all/[email protected]/
Hi, Could you please add a GET_PARAM IOCTL to this series for userspace to query the hardware version? I think I would return an enum that matches the NPU DT compatibles one to one. Then userspace can have a hardware database indexed by that value with sram, register map, etc. Regards, Tomeu > Igor Paunovic (1): > accel/rocket: request the core clocks by name > > Jiaxing Hu (14): > accel/rocket: take the completion register writes under job_lock > accel/rocket: wait for a running IRQ handler before resetting a core > accel/rocket: let the core suspend after a reset > accel/rocket: factor the completion tail out of the IRQ handler > dt-bindings: npu: rockchip: add rockchip,rk3576-rknn-core > dt-bindings: power: rockchip: allow resets in a power domain node > dt-bindings: iommu: rockchip: describe the RK3576 NPU MMU > pmdomain: rockchip: add optional per-domain power-on settle delay > pmdomain: rockchip: cycle an optional power-domain reset on power-on > accel/rocket: select the per-core clock and reset counts from match > data > accel/rocket: add RK3576 NPU (RKNN) support > arm64: dts: rockchip: add NPU core domain clocks and resets to rk3576 > arm64: dts: rockchip: add NPU (RKNN) nodes to rk3576 > arm64: dts: rockchip: enable the NPU on rk3576-rock-4d > > .../bindings/iommu/rockchip,iommu.yaml | 28 ++++ > .../npu/rockchip,rk3588-rknn-core.yaml | 47 +++++- > .../power/rockchip,power-controller.yaml | 8 + > .../boot/dts/rockchip/rk3576-rock-4d.dts | 22 +++ > arch/arm64/boot/dts/rockchip/rk3576.dtsi | 86 +++++++++- > drivers/accel/rocket/rocket_core.c | 32 +++- > drivers/accel/rocket/rocket_core.h | 11 +- > drivers/accel/rocket/rocket_device.c | 7 +- > drivers/accel/rocket/rocket_drv.c | 42 ++++- > drivers/accel/rocket/rocket_drv.h | 2 + > drivers/accel/rocket/rocket_job.c | 157 +++++++++++++++--- > drivers/pmdomain/rockchip/pm-domains.c | 89 +++++++--- > 12 files changed, 467 insertions(+), 64 deletions(-) > > > base-commit: 7649ba73f9e7e1e04d0b46213e39c79ae09dd55c > -- > 2.43.0 >
