Hi Cunyuan,

On Mon, Nov 09, 2026 at 08:09:00PM +0800, Cunyuan Liu wrote:
> Add Sky1 SoC data for system-level cache settings and to skip devfreq.
> 
> The GPU on CIX Sky1 needs an external reset before the driver first
> accesses the hardware. Without this reset, the GPU hardware cannot be
> accessed correctly. Acquire an optional exclusive reset for all platforms
> and apply it after enabling the clocks during initial probe. Platforms
> without a reset keep working through the reset framework NULL handling.

Adding support for an external reset should be separate from the enablement
of Sky1 GPU.

> 
> Configure SYSC_ALLOC before L2 power-on. Without these settings, GPU
> rendering results are displayed incorrectly.

Adding support for SYSC_ALLOC should be a separate patch. It can be used
by other SoCs as well, not just Sky1. 

> 
> Keep the clock settings provided by the PM firmware. This first version
> does not read OPPs or enable devfreq. It does not register a GPU cooling
> device.

This looks like a stop gap measure. What is your plan here? When do you
think you might be able to provide OPP and devfreq support and what is
the hold up?

> 
> Tested on Orion O6: offscreen pixel readback, kmscube, glmark2 at 1080p,
> runtime suspend and resume with a retained EGL context, software-triggered
> reset-worker tests, and module unload and reload. Display tests used
> local Komeda support.
> 
> Signed-off-by: Cunyuan Liu <[email protected]>
> ---
>  drivers/gpu/drm/panthor/panthor_devfreq.c  | 11 ++++++++++-
>  drivers/gpu/drm/panthor/panthor_device.c   | 13 +++++++++++++
>  drivers/gpu/drm/panthor/panthor_device.h   | 19 +++++++++++++++++++
>  drivers/gpu/drm/panthor/panthor_drv.c      | 14 ++++++++++++++
>  drivers/gpu/drm/panthor/panthor_gpu.c      | 14 ++++++++++++++
>  drivers/gpu/drm/panthor/panthor_gpu_regs.h |  2 ++
>  6 files changed, 72 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panthor/panthor_devfreq.c 
> b/drivers/gpu/drm/panthor/panthor_devfreq.c
> index 2249b41ca4af..1914549f7b1f 100644
> --- a/drivers/gpu/drm/panthor/panthor_devfreq.c
> +++ b/drivers/gpu/drm/panthor/panthor_devfreq.c
> @@ -154,6 +154,12 @@ int panthor_devfreq_init(struct panthor_device *ptdev)
>  
>       ptdev->devfreq = pdevfreq;
>  
> +     /* Keep the firmware clock settings until Sky1 devfreq is supported. */
> +     if (ptdev->soc_data && ptdev->soc_data->skip_devfreq) {
> +             ptdev->fast_rate = clk_get_rate(ptdev->clks.core);
> +             return 0;
> +     }

This should not be in the driver. If you want to have a fixed frequency just 
use a fixed
clock provider, or make the clock provider query the firmware for the value.

> +
>       /*
>        * The power domain associated with the GPU may have already added an
>        * OPP table, complete with OPPs, as part of the platform bus
> @@ -323,8 +329,11 @@ unsigned long panthor_devfreq_get_freq(struct 
> panthor_device *ptdev)
>       unsigned long freq = 0;
>       int ret;
>  
> -     if (!pdevfreq->devfreq)
> +     if (!pdevfreq->devfreq) {
> +             if (ptdev->soc_data && ptdev->soc_data->skip_devfreq)
> +                     return clk_get_rate(ptdev->clks.core);
>               return 0;
> +     }
>  
>       ret = pdevfreq->devfreq->profile->get_cur_freq(ptdev->base.dev, &freq);
>       if (ret)
> diff --git a/drivers/gpu/drm/panthor/panthor_device.c 
> b/drivers/gpu/drm/panthor/panthor_device.c
> index 9687c59de350..a3a32abec5f7 100644
> --- a/drivers/gpu/drm/panthor/panthor_device.c
> +++ b/drivers/gpu/drm/panthor/panthor_device.c
> @@ -229,6 +229,11 @@ int panthor_device_init(struct panthor_device *ptdev)
>               return ret;
>       }
>  
> +     ptdev->reset_control = 
> devm_reset_control_get_optional_exclusive(ptdev->base.dev, NULL);
> +     if (IS_ERR(ptdev->reset_control))
> +             return dev_err_probe(ptdev->base.dev, 
> PTR_ERR(ptdev->reset_control),
> +                                  "Failed to get GPU reset\n");
> +
>       ret = panthor_devfreq_init(ptdev);
>       if (ret)
>               return ret;
> @@ -511,6 +516,12 @@ int panthor_device_resume(struct device *dev)
>       if (ret)
>               goto err_disable_stacks_clk;
>  
> +     if (!panthor_device_is_initialized(ptdev)) {
> +             ret = reset_control_reset(ptdev->reset_control);
> +             if (ret)
> +                     goto err_disable_coregroup_clk;
> +     }
> +
>       panthor_devfreq_resume(ptdev);
>  
>       if (panthor_device_is_initialized(ptdev) &&
> @@ -553,6 +564,8 @@ int panthor_device_resume(struct device *dev)
>  
>  err_suspend_devfreq:
>       panthor_devfreq_suspend(ptdev);
> +
> +err_disable_coregroup_clk:
>       clk_disable_unprepare(ptdev->clks.coregroup);
>  
>  err_disable_stacks_clk:
> diff --git a/drivers/gpu/drm/panthor/panthor_device.h 
> b/drivers/gpu/drm/panthor/panthor_device.h
> index b55a3f9edd41..afb4167bd364 100644
> --- a/drivers/gpu/drm/panthor/panthor_device.h
> +++ b/drivers/gpu/drm/panthor/panthor_device.h
> @@ -19,6 +19,8 @@
>  #include <drm/gpu_scheduler.h>
>  #include <drm/panthor_drm.h>
>  
> +struct reset_control;
> +
>  struct panthor_csf;
>  struct panthor_csf_ctx;
>  struct panthor_device;
> @@ -34,10 +36,24 @@ struct panthor_pwr;
>  struct panthor_vm;
>  struct panthor_vm_pool;
>  
> +/**
> + * struct panthor_sysc_config - GPU system-cache configuration
> + */
> +struct panthor_sysc_config {
> +     /** @alloc: System-cache allocation policies for GPU access types. */
> +     u32 alloc[8];
> +};
> +
>  /**
>   * struct panthor_soc_data - Panthor SoC Data
>   */
>  struct panthor_soc_data {
> +     /** @skip_devfreq: Keep the firmware clock settings without devfreq. */
> +     bool skip_devfreq;
> +
> +     /** @sysc_config: System-cache configuration, or NULL to keep defaults. 
> */
> +     const struct panthor_sysc_config *sysc_config;
> +
>       /** @asn_hash_enable: True if GPU_L2_CONFIG_ASN_HASH_ENABLE must be 
> set. */
>       bool asn_hash_enable;
>  
> @@ -138,6 +154,9 @@ struct panthor_device {
>       /** @soc_data: Optional SoC data. */
>       const struct panthor_soc_data *soc_data;
>  
> +     /** @reset_control: Optional external GPU reset. */
> +     struct reset_control *reset_control;
> +
>       /** @phys_addr: Physical address of the iomem region. */
>       phys_addr_t phys_addr;
>  
> diff --git a/drivers/gpu/drm/panthor/panthor_drv.c 
> b/drivers/gpu/drm/panthor/panthor_drv.c
> index dc8d0191aef4..4d7b1230cd7b 100644
> --- a/drivers/gpu/drm/panthor/panthor_drv.c
> +++ b/drivers/gpu/drm/panthor/panthor_drv.c
> @@ -1872,12 +1872,26 @@ static struct attribute *panthor_attrs[] = {
>  
>  ATTRIBUTE_GROUPS(panthor);
>  
> +static const struct panthor_sysc_config sysc_config_cix_sky1 = {
> +     /* Sky1 needs these SYSC_ALLOC policies for correct display of GPU 
> output. */
> +     .alloc = {
> +             0x00230000, 0x00000023, 0x00000000, 0x00000000,
> +             0x00523222, 0x00523200, 0x00000022, 0x00000032,
> +     },
> +};

These should not be in the driver but in the device tree bindings. If you 
extract
the system cache code into a separate patch we can have a proper discussion 
there.

> +
> +static const struct panthor_soc_data soc_data_cix_sky1 = {
> +     .skip_devfreq = true,
> +     .sysc_config = &sysc_config_cix_sky1,
> +};
> +
>  static const struct panthor_soc_data soc_data_mediatek_mt8196 = {
>       .asn_hash_enable = true,
>       .asn_hash = { 0xb, 0xe, 0x0, },
>  };
>  
>  static const struct of_device_id dt_match[] = {
> +     { .compatible = "cix,sky1-mali", .data = &soc_data_cix_sky1 },
>       { .compatible = "mediatek,mt8196-mali", .data = 
> &soc_data_mediatek_mt8196, },
>       { .compatible = "rockchip,rk3588-mali" },
>       { .compatible = "arm,mali-valhall-csf" },
> diff --git a/drivers/gpu/drm/panthor/panthor_gpu.c 
> b/drivers/gpu/drm/panthor/panthor_gpu.c
> index a383b04f101e..9a6963fe62ae 100644
> --- a/drivers/gpu/drm/panthor/panthor_gpu.c
> +++ b/drivers/gpu/drm/panthor/panthor_gpu.c
> @@ -63,6 +63,19 @@ static void panthor_gpu_coherency_set(struct 
> panthor_device *ptdev)
>                 ptdev->gpu_info.selected_coherency);
>  }
>  
> +static void panthor_gpu_sysc_config_set(struct panthor_device *ptdev)
> +{
> +     const struct panthor_sysc_config *config;
> +     unsigned int i;
> +
> +     if (!ptdev->soc_data || !ptdev->soc_data->sysc_config)
> +             return;
> +
> +     config = ptdev->soc_data->sysc_config;
> +     for (i = 0; i < ARRAY_SIZE(config->alloc); i++)
> +             gpu_write(ptdev->gpu->iomem, GPU_SYSC_ALLOC(i), 
> config->alloc[i]);

This will crash for arch10 GPUs. I know that you're relying here on soc_data 
not having
the fields filled in, but if we move the sysc_config data to being provided by 
DT, we
need to check here.

> +}
> +
>  static void panthor_gpu_l2_config_set(struct panthor_device *ptdev)
>  {
>       struct panthor_gpu *gpu = ptdev->gpu;
> @@ -317,6 +330,7 @@ int panthor_gpu_l2_power_on(struct panthor_device *ptdev)
>       }
>  
>       /* Set the desired coherency mode and L2 config before the power up of 
> L2 */
> +     panthor_gpu_sysc_config_set(ptdev);
>       panthor_gpu_coherency_set(ptdev);
>       panthor_gpu_l2_config_set(ptdev);
>  
> diff --git a/drivers/gpu/drm/panthor/panthor_gpu_regs.h 
> b/drivers/gpu/drm/panthor/panthor_gpu_regs.h
> index 4c5b953796e4..f9b65a4dae83 100644
> --- a/drivers/gpu/drm/panthor/panthor_gpu_regs.h
> +++ b/drivers/gpu/drm/panthor/panthor_gpu_regs.h
> @@ -116,4 +116,6 @@
>  #define   GPU_COHERENCY_ACE                          1
>  #define   GPU_COHERENCY_NONE                         31
>  
> +#define GPU_SYSC_ALLOC(n)                            (0x340 + (n) * 4)
> +
>  #endif /* __PANTHOR_GPU_REGS_H__ */
> -- 
> 2.53.0
> 

Best regards,
Liviu


-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

Reply via email to