在 2026-11-10二的 13:00 +0100,Krzysztof Kozlowski写道: > On Mon, Nov 09, 2026 at 05:07:04PM +0100, Romain TISSERAND wrote: > > The panel is a MIPI-DSI peripheral, a child node of its DSI host, > > and the > > driver does not use a graph port. A port is only needed when the > > host > > links its panel through the graph; other DSI hosts, such as the > > Allwinner > > sun6i-a31-mipi-dsi one, link the child node and have no output port > > to > > point at. The PinePhone panel is described that way on the same > > host, > > without a port. > > > > Keep the port allowed (panel-common) but no longer required, as for > > other > > DSI panels such as ilitek,ili9881c. > > ilitek,ili7807s and a few others have the same and it is confusing. > The > port should be required when this is connected over SPI or I2C, but > not > for MIPI DSI. I think that for MIPI DSI port is meaningless so > actually > incorrect.
I found that the dw-mipi-dsi common code (e.g. on Rockchip SoCs with dw_mipi_dsi-rockchip) would expect the panel to be connected via a port even if it's the child node of the DSI controller. Such an example is at arch/arm64/boot/dts/rockchip/rk3399-pinephone- pro.dts . Thanks, Icenowy > > Why was it added in the first place? > > > > > Reviewed-by: Igor Reznichenko <[email protected]> > > Signed-off-by: Romain TISSERAND <[email protected]> > > --- > > .../devicetree/bindings/display/panel/ilitek,ili9488.yaml | > > 1 - > > 1 file changed, 1 deletion(-) > > Reviewed-by: Krzysztof Kozlowski > <[email protected]> > > Best regards, > Krzysztof
