On 11/11/2026 12:04, Karunika Choo wrote:
> On 11/11/2026 10:41, Krzysztof Kozlowski wrote:
>> On 11/11/2026 11:32, Karunika Choo wrote:
>>> On 11/11/2026 08:33, Krzysztof Kozlowski wrote:
>>>> On Tue, Nov 10, 2026 at 03:38:29PM +0000, Karunika Choo wrote:
>>>>> Add a separate device-tree schema for Mali 5th-Gen AM GPUs.
>>>>>
>>>>> AM_GOVERNOR controls GPU frequency. The GPU node does not accept OPP,
>>>>> cooling or GPU supply properties.
>>>>>
>>>>> Signed-off-by: Karunika Choo <[email protected]>
>>>>> ---
>>>>> v2:
>>>>> - Move arm,mali-gen5-am support from arm,mali-valhall-csf.yaml to a
>>>>>   separate arm,mali-gen5-am.yaml schema.
>>>>> - Move the AM GPU example to the new schema and add the interrupt
>>>>>   binding headers.
>>>>> - Add the new schema to the Panthor MAINTAINERS entry.
>>>>>
>>>>>  .../bindings/gpu/arm,mali-gen5-am.yaml        | 90 +++++++++++++++++++
>>>>>  MAINTAINERS                                   |  1 +
>>>>>  2 files changed, 91 insertions(+)
>>>>>  create mode 100644 
>>>>> Documentation/devicetree/bindings/gpu/arm,mali-gen5-am.yaml
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-gen5-am.yaml 
>>>>> b/Documentation/devicetree/bindings/gpu/arm,mali-gen5-am.yaml
>>>>> new file mode 100644
>>>>> index 0000000000000..6349888e1ae2a
>>>>> --- /dev/null
>>>>> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-gen5-am.yaml
>>>>> @@ -0,0 +1,90 @@
>>>>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>>>>> +%YAML 1.2
>>>>> +---
>>>>> +$id: http://devicetree.org/schemas/gpu/arm,mali-gen5-am.yaml#
>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>>> +
>>>>> +title: ARM Mali 5th Gen AM GPU
>>>>> +
>>>>> +maintainers:
>>>>> +  - Liviu Dudau <[email protected]>
>>>>> +  - Boris Brezillon <[email protected]>
>>>>> +
>>>>> +properties:
>>>>> +  $nodename:
>>>>> +    pattern: '^gpu@[a-f0-9]+$'
>>>>
>>>> Same comments as last time.
>>>
>>> Sorry, do you mean that 'gpu' not generic enough?
>>
>> I asked to drop the node name completely.
>>
> 
> ah! Understood. Will do that in v3.
> 
>>>
>>>>> +
>>>>> +  compatible:
>>>>> +    const: arm,mali-gen5-am
>>>>
>>>> Same comments as last time. Seems like you just ignore review, so I will
>>>> finish here.
>>>>
>>>
>>> Hi, we are trying to provide initial support for v15. The vendor 
>>> identifiers will be added once there is an available device.
>>>
>>
>> So how can this initial support be run? Which board has it? I received
>> only three patches of entire thread, but if there was DTS I would be
>> cc-ed. I can't find such patch.
> 
> Apologies for the trouble. This was tested on internal FPGAs, but let
> me try to see if I can add a representative DTS for one of our publicly
> available FVP platforms in v3.

So it cannot run on its own, because internal FPGA is a not a complete
and final system. I assume you need some SoC integration, so you need a
front compatible. If it is unknown, then it has to be {} (see other
cases how we represented unknown integration).

Best regards,
Krzysztof

Reply via email to