This series adds initial Linux support for the Parade PS195 DP-to-HDMI bridge and uses it to enable HDMI on the Qualcomm Glymur CRD family (Glymur CoB/SiP, Mahua, and Kalambo).
The PS195 operates autonomously using firmware loaded from external SPI flash — it handles link training, EDID access, and hotplug detection without host register intervention at runtime, so no existing bridge driver fits its power-sequencing and reset model. It introduces: - a DT binding for PS195 (supplies, optional reset GPIO, and port graph), - a DRM bridge driver that implements PS195 power sequencing and PM handling, and - arm64 integration (defconfig + shared glymur-crd.dtsi wiring) so all three variants can route DP over USB2 QMP combo PHY to HDMI through PS195. Deps: PHY PLL change: https://lore.kernel.org/all/[email protected]/ Glymur commonize change for regulator: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Nabige Aala <[email protected]> --- Mahadevan P (4): dt-bindings: display: bridge: Add Parade PS195 drm/bridge: Add a driver for the Parade PS195 arm64: defconfig: Enable the Parade PS195 bridge arm64: dts: qcom: glymur-crd: Enable HDMI output via PS195 .../bindings/display/bridge/parade,ps195.yaml | 98 ++++++++++ MAINTAINERS | 7 + arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 142 +++++++++++++++ arch/arm64/boot/dts/qcom/glymur.dtsi | 6 + arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/bridge/Kconfig | 10 ++ drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/parade-ps195.c | 197 +++++++++++++++++++++ 8 files changed, 462 insertions(+) --- base-commit: 944e974742c54a1d8236fe16897644c35ffd6433 change-id: 20261112-mahua-hdmi-8ee75b4fd29a Best regards, -- Nabige Aala <[email protected]>
