On Fri, 06 Nov 2026 15:45:29 +0000,
Aneesh Kumar K.V <[email protected]> wrote:
> 
> Marc Zyngier <[email protected]> writes:
> 
> > On Wed, 04 Nov 2026 16:45:55 +0000,
> > "Aneesh Kumar K.V (Arm)" <[email protected]> wrote:
> >> 
> >> VPE L1 tables are allocated from the CPU-starting callback, where sleeping 
> >> is
> >> not allowed.  Remove the page allocation from this atomic path.
> >> 
> >> Use a blocking allocation for the boot CPU and record the resulting table
> >> order.  Allocate a page of that order from the sleepable CPU hotplug 
> >> prepare
> >> stage for each secondary CPU.  Consume the preallocated page only when the 
> >> CPU
> >> cannot inherit an existing redistributor or ITS table.
> >> 
> >> Reclaim unused preallocations after the CPU reaches the online state, and 
> >> from
> >> the prepare-state teardown when CPU bring-up aborts.
> >
> > No. The way to do it is to move the ITS probing out of the
> > non-sleepable CPU hotplug path.
> >
> > I proposed a potential hack at [1] (which I find far more palatable
> > than this proposal), but the real fix is to probe the ITSs as
> > devices.
> >
> 
> Could you share a bit more detail on what you have in mind?
> 
> Are you suggesting that we create a platform device for each ITS and
> initialize it through the driver's probe callback, while the rest of the
> GIC initialization stays in the existing early boot path?
> 
> Would that mean the main GIC is operational during early boot, while
> ITS-dependent features, such as MSI delivery and direct injection, become
> available after the ITS devices probe?
> 
> Is that the split you have in mind?

Yes. Then once this is done, all the tables become normal DMA
allocations, for which there should already be adequate support.

        M.

-- 
Jazz isn't dead. It just smells funny.

Reply via email to