The INT2 GDSC on Kaanapali (SM8850) powers the VIG2, VIG3 and DMA5 source pipes. Without enabling it, these pipes remain inaccessible.
The DPU is supplied by both CORE and INT2, so describe both GDSCs as its power domains rather than attaching the DPU directly to their parent MMCX domain. Keep CORE attached to the parent MDSS device because it also supplies shared MDSS hardware outside the DPU. Reviewed-by: Abel Vesa <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Yongxing Mou <[email protected]> --- arch/arm64/boot/dts/qcom/kaanapali.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi index 9f04a5ad75f2..3706b89fcd0f 100644 --- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi @@ -3691,7 +3691,9 @@ mdss_mdp: display-controller@9801000 { operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd RPMHPD_MMCX>; + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>, + <&dispcc DISP_CC_MDSS_CORE_INT2_GDSC>; + power-domain-names = "core", "int2"; ports { #address-cells = <1>; -- 2.43.0
