Hi Damon, Chaoyi, The TRM names GRF_VO1_CON0 bit 5 the HDMI0 vsync polarity and bit 6 hsync (7 and 8 for HDMI1); the driver, like the vendor kernel, uses them the other way round.
The HDMI controller agrees with the TRM. With patch 3 and 1920x1080@144 +HSync -VSync the driver sets bit 6, and VIDEO_INTERFACE_STATUS0 reports -HSync +VSync; with 1600x1280@60 -HSync +VSync it sets bit 5 and the controller sees +HSync -VSync. v3 keeps patch 3 as you reviewed it and adds patch 4, which swaps the two bits; with it the controller reports both modes as set. Please shout if the TRM is wrong here. v3 4/8: https://lore.kernel.org/r/[email protected] Best regards, Arun
