On 03-11-2026 17:04, Tomi Valkeinen wrote: > This series aims to add display support for all display interfaces on > BeagleY-AI board. More generally, it adds display support for TI AM62P, > J722S, and related SoCs. > > The main topics to highlight: > > - The data and sync signal polarities require accessing a register > (DPI0_CLK_CTRL) in the CTRL_MMR block. This has already been discussed > e.g. in > > https://lore.kernel.org/all/20250730-fix-edge-handling-v1-0-1bdfb3fe7922%40bootlin.com/. > This topic is still open, and it also touches already upstreamed SoCs > with DSS (AM625). In other words, with this series, we don't have full > polarity support, and DPI works exactly like upstream AM625's does. > > - In the SoC, the two OLDI TX instances are shared between the two DSS > instances. This has been a bit tricky to solve neatly. In this series > the result is that in the DT we have three OLDI TX nodes, two under > DSS0, one under DSS1, representing the OLDIs that the DSS instance > can use. > > - I'm no audio expert, but based on the original dts from Robert Nelson, > I did get HDMI audio working, but I see "davinci-mcasp > 2b10000.audio-controller: Sample-rate is off by 400 PPM". > > With this series one can use the HDMI output on BeagleY-AI. I have also > tested the DSI output with Raspberry Pi's 7" DSI display, and OLDI > output with an oscilloscope (I don't have a suitable OLDI panel) with > extra DT overlays. > > Tomi > > Signed-off-by: Tomi Valkeinen <[email protected]> > --- > Changes in v5: > - Add Rb tags from Aradhya > - New cleanup patch: "drm/tidss: Use the AM625 features for AM62A7" > - Ensure tidss_oldi_create_pd_devs() is only called for primary OLDI > - Add missing cbass ranges for DSS1 and DSI (DSS was already there) to > k3-am62p.dtsi > - Link to v4: > https://patch.msgid.link/[email protected] > > Changes in v4: > - Based on today's drm-misc-next > - Dropped the CTRL MMR related code. This means the DPI polarities are > not quite right (the same as AM625) > - Dropped the commit to convert OLDI to an aux driver. This version uses > a new (unmerged) PM dev_pm_domain_attach_by_node() to manage the OLDI > power domains. > - Dropped a bunch of commits which were merged via "[PATCH 00/10] > drm/tidss: Preparation for AM62P and BeagleY-AI display support" > series. > - Dropped tested-by tags, as the series has changed quite a bit. > - Includes new fixes and cleanup patches: > - vp_bus_type removal: > - "Add helper to identify the AM65x OLDI video port" > - "Stop using vp_bus_type for directly connected panels" > - "Drop the tied off video port check from mode validation" > - "Remove the unused vp_bus_type feat" > - OLDI: > - "Drop unnecessary forward declaration" > - "Fix wrong return value from tidss_oldi_mode_valid()" > - "Fix serial clock reference leak" > - "Fix cleanup on a failed init" > - "Move the setup of one OLDI TX to its own function" > - "Add power domain support" > - Link to v3: > https://patch.msgid.link/[email protected] > > Changes in v3: > - Base on "[PATCH 0/6] arm64: ti: Use syscon for the Control Module" > - Drop quotation marks from Rb tags > - Drop Tested-by tags for the bindings patches > - "drm/tidss: Add external data and sync signal edge configuration": Fix > error handling > - "drm/tidss: Add support for DPIENABLE bit": set/unset DPIENABLE in > prepare/unprepare > - "drm/tidss: oldi: Convert OLDI to an aux driver": Improve cleanups > (of_node_put, clk_put, device_link_del) > - Dropped "arm64: dts: ti: k3-am62p-j722s-common-main: Make main_conf a > syscon" > - "arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS": Add > missing clocks and ti,oldi-io-ctrl for oldi1 node. Drop unused > main-gpio0-ioexp-intr-default-pins node. Fix MCASP1_AXR0 pin > direction. Fix DSS videoport numbering. > - Link to v2: > https://lore.kernel.org/r/[email protected] > > Changes in v2: > - Add Rb and Tb tags > - Drop "dt-bindings: mfd: syscon: Add ti,am625-dss-dpi0-clk-ctrl > compatible", which is now implemented with the below changes. > - New patch "dt-bindings: display: ti,am65x-dss: Add ti,dpi-io-ctrl" > - Modify "drm/tidss: Add external data and sync signal edge > configuration" to use the 'ti,dpi-io-ctrl' with offset. > - New patch "arm64: dts: ti: k3-am62p-j722s-common-main: Make main_conf > a syscon". > - Modify "arm64: dts: ti: k3-am62p-j722s-common-main: Add support for > DSS" to set 'ti,dpi-io-ctrl' properties > - Drop generic desc in DT bindings for power-domains property > - Fix pm_runtime_get_sync() return value check > - Link to v1: > https://lore.kernel.org/r/[email protected] > > --- > Andrew Davis (1): > arm64: dts: ti: beagley-ai: Enable HDMI display and audio > > Jayesh Choudhary (1): > arm64: dts: ti: k3-am62p-j722s-common-main: Add support for DSS > > Swamil Jain (1): > drm/tidss: Add support for AM62P display subsystem > > Tomi Valkeinen (12): > dt-bindings: display: ti,am65x-dss: Add AM62P DSS > drm/tidss: Add helper to identify the AM65x OLDI video port > drm/tidss: Stop using vp_bus_type for directly connected panels > drm/tidss: Drop the tied off video port check from mode validation > drm/tidss: Remove the unused vp_bus_type feat > drm/tidss: Use the AM625 features for AM62A7 > drm/tidss: oldi: Drop unnecessary forward declaration > drm/tidss: oldi: Fix wrong return value from tidss_oldi_mode_valid() > drm/tidss: oldi: Fix serial clock reference leak > drm/tidss: oldi: Fix cleanup on a failed init > drm/tidss: oldi: Move the setup of one OLDI TX to its own function > drm/tidss: oldi: Add power domain support >
Tested on AM62P(RPi dsi panel and Microtips MF101HIE Dual LVDS panel) and BeagleY-AI(LincolnTech LCD 185 Dual LVDS panel). Testlogs: https://gist.github.com/jainswamil/01143112bc75cca46f4395958278edcb Testing branch: https://github.com/jainswamil/linux-next/tree/v5_20261103_tomi_valkeinen_ideasonboard_com Tested-by: Swamil Jain <[email protected]> Regards, Swamil. > .../bindings/display/ti/ti,am65x-dss.yaml | 27 ++ > .../boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 110 +++++++ > arch/arm64/boot/dts/ti/k3-am62p.dtsi | 20 ++ > arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 180 +++++++++++ > arch/arm64/boot/dts/ti/k3-j722s.dtsi | 16 + > drivers/gpu/drm/tidss/tidss_dispc.c | 82 +---- > drivers/gpu/drm/tidss/tidss_dispc.h | 18 +- > drivers/gpu/drm/tidss/tidss_drv.c | 3 +- > drivers/gpu/drm/tidss/tidss_kms.c | 13 +- > drivers/gpu/drm/tidss/tidss_oldi.c | 356 > +++++++++++++-------- > drivers/gpu/drm/tidss/tidss_oldi.h | 2 - > 11 files changed, 598 insertions(+), 229 deletions(-) > --- > base-commit: ea74b623855291e60835c0f7fa7a29673332ad41 > change-id: 20260420-beagley-ai-display-d7f634cde5f4 > prerequisite-message-id: > [email protected] > prerequisite-patch-id: 22251f03ea9147feb3270bb8ecf5d08169ddf7a6 > prerequisite-patch-id: 667af0055a8a26880d810f1a246202dde3b4b9fb > prerequisite-patch-id: 76b566286279f3544096c32a34d757ac47ff77d6 > prerequisite-message-id: > [email protected] > prerequisite-patch-id: df4c4c2ab36f4504f08fd89804c91ecf1bbc5b85 > prerequisite-patch-id: d270eb332c88f888f628b2cf751517500024b12c > prerequisite-patch-id: 6050aad2a160d9e85b176e8118f4ac4247de1355 > prerequisite-patch-id: a7b3986c944f62156da6b368e6251b29451feaf2 > prerequisite-patch-id: eb52b7ed89c1d44539bc7eef61f242dd444d3171 > prerequisite-patch-id: e1a953467d847bea6bc9847134c0199e4702423b > prerequisite-patch-id: 538b6e710dcc07bd70eed2795d9e463e91bf0b48 > prerequisite-patch-id: 6636bdd386becb3622944e57653e4fd1502527cc > prerequisite-patch-id: 84cf0fc416da9a016ebbd586020cb67b18aa84b7 > prerequisite-patch-id: 64ff4472fe4467e9da0a11f69fe30d50db12204d > prerequisite-patch-id: db872cf55d9a2d204c4f1d08f49cd404da285670 > prerequisite-patch-id: c6c3d34380425f4ee21411e860726786b56c8236 > prerequisite-patch-id: ac1f5d7bc054cf7a0d84cb343f4b1d1e393a7956 > prerequisite-message-id: > [email protected] > prerequisite-patch-id: 154b9cfd53b351e7d7617322e436dcf3db3413b3 > prerequisite-message-id: > [email protected] > prerequisite-patch-id: 45efa9d7ccd75f4a0b5c6868fe8ab369cd83303e > > Best regards, > -- > Tomi Valkeinen <[email protected]>
