Make epod-supply optional and mark it deprecated. The MCDE should use its power domain instead.
Require either epod-supply or power-domains, allowing both for transitional device trees. Reject nodes describing neither. Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Linus Walleij <[email protected]> --- Deprecate the legacy EPOD supply and allow MCDE to use its power domain instead. Accept either property or both, rejecting nodes with neither. This binding-only change can be applied independently. The companion MCDE driver and Ux500 DTS changes are submitted separately. --- Documentation/devicetree/bindings/display/ste,mcde.yaml | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index 05e7e4ebc882..e7978eca6f32 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -39,7 +39,8 @@ properties: maxItems: 1 epod-supply: - description: a phandle to the EPOD regulator + description: a phandle to the legacy EPOD regulator + deprecated: true vana-supply: description: a phandle to the analog voltage regulator @@ -103,9 +104,14 @@ required: - interrupts - clocks - clock-names - - epod-supply - vana-supply +anyOf: + - required: + - epod-supply + - required: + - power-domains + additionalProperties: false examples: @@ -121,7 +127,6 @@ examples: reg = <0xa0350000 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pm_domains DOMAIN_B2R2_MCDE>; - epod-supply = <&db8500_b2r2_mcde_reg>; vana-supply = <&ab8500_ldo_ana_reg>; clocks = <&prcmu_clk PRCMU_MCDECLK>, <&prcmu_clk PRCMU_LCDCLK>, --- base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4 change-id: 20261116-ux500-mcde-powerdomain-binding-0ad1b35c46bc Best regards, -- Linus Walleij <[email protected]>
