The display controller in Tegra20/30 SoCs features an 8-bit SPI interface that closely resembles the MIPI DBI Type B protocol and is referred to as '8-bit CPU'.
Add MIPI DBI bus support along with 2 DBI Type B panels used in LG Optimus 2X which work with the 8-bit CPU interface. Convert rgb, dsi, hdmi and sor to use atomic versions of drm_encoder_helper_funcs needed for bridge state requesting. Refactor and expand DC header. Add DC parametrization options needed for fine tuning by bridges. Make panel parsing by tegra_output_probe() optional and document optional DSI port. Add 8-bit CPU interface in form of a bridge linking to RGB port. --- Changes in v2: - convert enums in the dc header into definitions list - add check in RGB if bridge_state is not NULL, if yes, use default flags - inverted FLAG_PIXDATA_SAMPLE flag setup logic since default value is set to be on NEGEDGE while v1 set default to be on POSEDGE - 8bit-cpu schema renamed to dbi, removed compaible and set as DC child - expanded list of required properties - 8bit-cpu bridge remodelled into dbi interface as DC child - improve gpio handling - rework attach to get drvdata from parent - add panel supplies description - split panel driver into per-panel drivers - get DBI interface from the patent directly I have deliberately left GPIO parsing from device tree since it seems to be the most convenient and mainstream method of working with GPIOs. Changes in v3: - rgb: fix default bus_flags to match original behavior - dbi-schema: remove compatible from required props remove dc@54200000 wrapper from example restrict dbi nodes for tegra20/tegra30 only - dbi: remove unused idx from tegra_dbi_priv wrap dbi registration in dc with devm_add_action_or_reset() separate dbi into separate object export tegra_dc_commit() and trace_dc_readl()/dc_readl() Changes in v4: - reorder patches to avoid errors on checking dbi schema - dbi schema renamed to nvidia,tegra20-dbi for consistency - fix DC_DISP_V_PULSE0_POSITION_* > DC_DISP_V_PULSE1_POSITION_* - add MODULE_ALIAS - swap width and height in panels - dropped use of init-sequence and gpios - dbi driver reworked to use only DC to operate pins Changes in v5: - added commit modelling DBI bus (suggested by Mikko Perttunen) - hitachi and lg panels converted to mipi_dbi_driver - dc header refactored and completed - added commit documenting DSI controller port - added commit which converts drm_encoder_helper_funcs to use atomic enable/disable - added commit which makes panel parsing in tegra_output_probe() optional - dbi command/data converted to enum - dc com pins are now backed up into drivers private structure - magic numbers replaced with pin defines - dropped tegra_dc_readl() from tegra_dbi_pin_set - tegra_dbi_pin_set() accepts boolean third argument - tegra_dbi_write() second argument converted to use tegra_dbi_dc_signal enum - used field_get() to extract pin value - extended comment regarding init sequence - nvidia,index > generic reg property - adjusted tegra_dbi_atomic_enable() to properly handle shadowed registers - switched to use of_drm_get_bridge_by_endpoint() since panels are auto-wrapped into bridge now - added support for mipi_dbi_host_ops - added resource managed helper to register DBI device and provided to DC via header - dbi.o built with all other tegra drm files Changes in v6: - improved descriptions of new framework - mipi dbi bus commit authorship was changed with Mikko's permission - panel commits swapped with mipi dbi panel conversion commits - fixed tegra_output_probe() for hdmi - added CONFIG_DRM_MIPI_DBI select into CONFIG_DRM_TEGRA - devm_drm_bridge_add() moved into bridge probe to avoid possible issues with deferred panel probing - setting LDC pin to V Pulse 1 moved before GPIO pin reconfiguration - DC_CMD_STATE_ACCESS is set to read and write in tegra_dbi_atomic_disable() - platform_driver_register() does not error out if driver is registered Changes in v7: - reduce changes in the panels when converting to mipi dbi - dropped of_node_get() in devm_mipi_dbi_device_register - remove enable()/disable() operations and add prep prev bridge flag - drop add DC header changes, add only strictly needed by the dbi - dropped tegra_dbi_iface and reg_entry enums - dropped reg from struct tegra_dbi_priv, com_pin_backup converted to u32 - interface dropped from struct tegra_dbi_interface and init call added - BIT macro converted to PIN_UNMASK in the tegra_dbi_pin_set() - init functions and tegra_dbi_interface structure moved before probe - tegra_dbi_atomic_enable() split into pre_enable() and enable() phases to squeeze interface into existing framework - DC_CMD_STATE_ACCESS and setting active true moved into init functions - reg reading moved before bridge allocation - reg renamed to nvidia,interface Please, keep in mind that this series must be applied on top of https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next) --- Svyatoslav Ryhel (12): drm: Add MIPI DBI bus support for MIPI DBI Type A and B drm/panel: panel-hitachi-tx10d07vm0baa: Convert to use MIPI DBI bus drm/panel: panel-hitachi-tx10d07vm0baa: Drop redundant disable() operation drm/panel: panel-lg-lh400wv3: Convert to use MIPI DBI bus drm/panel: panel-lg-lh400wv3: Drop redundant disable() operation drm/tegra: dc: Add elements required by Tegra MIPI DBI dt-bindings: display: tegra: Document Tegra20 DSI port drm/tegra: output: Make panel parsing configurable drm/tegra: Convert to use atomic versions of drm_encoder_helper_funcs drm/tegra: rgb: Parameterize configuration based on bus flags dt-bindings: display: tegra: Document 8-bit CPU parallel interface drm/tegra: Add support for 8-bit CPU interface .../display/tegra/nvidia,tegra20-dbi.yaml | 108 ++++ .../display/tegra/nvidia,tegra20-dc.yaml | 15 + .../display/tegra/nvidia,tegra20-dsi.yaml | 6 + drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_mipi_dbi_bus.c | 258 ++++++++ .../drm/panel/panel-hitachi-tx10d07vm0baa.c | 35 +- drivers/gpu/drm/panel/panel-lg-lh400wv3.c | 35 +- drivers/gpu/drm/tegra/Kconfig | 1 + drivers/gpu/drm/tegra/Makefile | 1 + drivers/gpu/drm/tegra/dbi.c | 551 ++++++++++++++++++ drivers/gpu/drm/tegra/dc.c | 4 + drivers/gpu/drm/tegra/dc.h | 197 ++++++- drivers/gpu/drm/tegra/drm.h | 2 +- drivers/gpu/drm/tegra/dsi.c | 22 +- drivers/gpu/drm/tegra/hdmi.c | 22 +- drivers/gpu/drm/tegra/output.c | 52 +- drivers/gpu/drm/tegra/rgb.c | 64 +- drivers/gpu/drm/tegra/sor.c | 20 +- include/drm/drm_mipi_dbi_bus.h | 113 ++++ 19 files changed, 1397 insertions(+), 111 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dbi.yaml create mode 100644 drivers/gpu/drm/drm_mipi_dbi_bus.c create mode 100644 drivers/gpu/drm/tegra/dbi.c create mode 100644 include/drm/drm_mipi_dbi_bus.h -- 2.53.0
