Add DC register definitions with additional fields in preparation for
adding the 8-bit CPU interface (MIPI DBI).

Signed-off-by: Svyatoslav Ryhel <[email protected]>
---
 drivers/gpu/drm/tegra/dc.h | 194 ++++++++++++++++++++++++++++++++++---
 1 file changed, 183 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h
index 0cb0515968b35..e8913c5530a2d 100644
--- a/drivers/gpu/drm/tegra/dc.h
+++ b/drivers/gpu/drm/tegra/dc.h
@@ -272,14 +272,150 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
 #define  DC_COM_CRC_CONTROL_WAIT (1 << 1)
 #define  DC_COM_CRC_CONTROL_ENABLE (1 << 0)
 #define DC_COM_CRC_CHECKSUM                    0x301
-#define DC_COM_PIN_OUTPUT_ENABLE(x) (0x302 + (x))
-#define DC_COM_PIN_OUTPUT_POLARITY(x) (0x306 + (x))
-#define LVS_OUTPUT_POLARITY_LOW (1 << 28)
-#define LHS_OUTPUT_POLARITY_LOW (1 << 30)
-#define DC_COM_PIN_OUTPUT_DATA(x) (0x30a + (x))
-#define DC_COM_PIN_INPUT_ENABLE(x) (0x30e + (x))
-#define DC_COM_PIN_INPUT_DATA(x) (0x312 + (x))
-#define DC_COM_PIN_OUTPUT_SELECT(x) (0x314 + (x))
+
+#define DC_COM_PIN_OUTPUT_ENABLE(x)            (0x302 + (x))
+#define DC_COM_PIN_OUTPUT_POLARITY(x)          (0x306 + (x))
+#define LVS_OUTPUT_POLARITY_LOW                        BIT(28)
+#define LHS_OUTPUT_POLARITY_LOW                        BIT(30)
+#define DC_COM_PIN_OUTPUT_DATA(x)              (0x30a + (x))
+/* Pin unmask is 1 bit above position of the pin in the OUTPUT_DATA register */
+#define PIN_UNMASK(x)                          BIT((x) + 1)
+#define DC_COM_PIN_INPUT_ENABLE(x)             (0x30e + (x))
+
+/*
+ * The definitions below describe pin positions in the 
DC_COM_PIN_OUTPUT_ENABLE(x),
+ * DC_COM_PIN_OUTPUT_POLARITY(x), DC_COM_PIN_OUTPUT_DATA(x), and
+ * DC_COM_PIN_INPUT_ENABLE(x) registers. The comment before each group 
indicates
+ * the index of the register (the x value).
+ */
+
+/* 0 */
+#define PIN_LD0                                        0
+#define PIN_LD1                                        2
+#define PIN_LD2                                        4
+#define PIN_LD3                                        6
+#define PIN_LD4                                        8
+#define PIN_LD5                                        10
+#define PIN_LD6                                        12
+#define PIN_LD7                                        14
+#define PIN_LD8                                        16
+#define PIN_LD9                                        18
+#define PIN_LD10                               20
+#define PIN_LD11                               22
+#define PIN_LD12                               24
+#define PIN_LD13                               26
+#define PIN_LD14                               28
+#define PIN_LD15                               30
+
+/* 1 */
+#define PIN_LD16                               0
+#define PIN_LD17                               2
+#define PIN_LPW0                               16
+#define PIN_LPW1                               18
+#define PIN_LPW2                               20
+#define PIN_LSC0                               24
+#define PIN_LSC1                               26
+#define PIN_LVS                                        28
+#define PIN_LHS                                        30
+
+/* 2 */
+#define PIN_LHP0                               0
+#define PIN_LHP1                               2
+#define PIN_LHP2                               4
+#define PIN_LVP0                               8
+#define PIN_LVP1                               10
+#define PIN_LM0                                        16
+#define PIN_LM1                                        18
+#define PIN_LDI                                        20
+#define PIN_LPP                                        22
+
+/* 3 */
+#define PIN_LSCK                               0
+#define PIN_LSDA                               2
+#define PIN_LCSN                               4
+#define PIN_LDC                                        6
+#define PIN_LSPI                               8
+#define PIN_LSDI                               10
+
+#define DC_COM_PIN_INPUT_DATA(x)               (0x312 + (x))
+
+/*
+ * DC_COM_PIN_OUTPUT_SELECT(x) is a set of 7 registers that allow selecting
+ * one of 7 functions for each pin using 3 bits. Clearing all bits sets
+ * the pin to its primary function, while setting them to 1 configures it
+ * as a GPIO output. Other functions are unique to each pin. For details,
+ * check "23.7.17 DC_COM_PIN_OUTPUT_SELECT0_0" in the Tegra30 TRM.
+ */
+#define DC_COM_PIN_OUTPUT_SELECT(x)            (0x314 + (x))
+#define PIN_OUTPUT_SELECT_MASK(x)              (0x7 << (x))
+#define PIN_OUTPUT_SELECT_PRIM(x)              (0 << (x))
+#define PIN_OUTPUT_SELECT_OUT(x)               (1 << (x))
+#define PIN_OUTPUT_SELECT_F2(x)                        (2 << (x))
+#define PIN_OUTPUT_SELECT_F3(x)                        (3 << (x))
+#define PIN_OUTPUT_SELECT_F4(x)                        (4 << (x))
+#define PIN_OUTPUT_SELECT_F5(x)                        (5 << (x))
+#define PIN_OUTPUT_SELECT_F6(x)                        (6 << (x))
+#define PIN_OUTPUT_SELECT_F7(x)                        (7 << (x))
+
+/*
+ * The definitions below describe pin offset in the DC_COM_PIN_OUTPUT_SELECT(x)
+ * registers. The comment before each group indicates the index of the register
+ * (the x value).
+ */
+
+/* 0 */
+#define PIN_OUTPUT_SELECT_LD0                  0
+#define PIN_OUTPUT_SELECT_LD1                  4
+#define PIN_OUTPUT_SELECT_LD2                  8
+#define PIN_OUTPUT_SELECT_LD3                  12
+#define PIN_OUTPUT_SELECT_LD4                  16
+#define PIN_OUTPUT_SELECT_LD5                  20
+#define PIN_OUTPUT_SELECT_LD6                  24
+#define PIN_OUTPUT_SELECT_LD7                  28
+
+/* 1 */
+#define PIN_OUTPUT_SELECT_LD8                  0
+#define PIN_OUTPUT_SELECT_LD9                  4
+#define PIN_OUTPUT_SELECT_LD10                 8
+#define PIN_OUTPUT_SELECT_LD11                 12
+#define PIN_OUTPUT_SELECT_LD12                 16
+#define PIN_OUTPUT_SELECT_LD13                 20
+#define PIN_OUTPUT_SELECT_LD14                 24
+#define PIN_OUTPUT_SELECT_LD15                 28
+
+/* 2 */
+#define PIN_OUTPUT_SELECT_LD16                 0
+#define PIN_OUTPUT_SELECT_LD17                 4
+
+/* 3 */
+#define PIN_OUTPUT_SELECT_LPW0                 0
+#define PIN_OUTPUT_SELECT_LPW1                 4
+#define PIN_OUTPUT_SELECT_LPW2                 8
+#define PIN_OUTPUT_SELECT_LSC0                 16
+#define PIN_OUTPUT_SELECT_LSC1                 20
+#define PIN_OUTPUT_SELECT_LVS                  24
+#define PIN_OUTPUT_SELECT_LHS                  28
+
+/* 4 */
+#define PIN_OUTPUT_SELECT_LHP0                 0
+#define PIN_OUTPUT_SELECT_LHP1                 4
+#define PIN_OUTPUT_SELECT_LHP2                 8
+#define PIN_OUTPUT_SELECT_LVP0                 16
+#define PIN_OUTPUT_SELECT_LVP1                 20
+
+/* 5 */
+#define PIN_OUTPUT_SELECT_LM0                  0
+#define PIN_OUTPUT_SELECT_LM1                  4
+#define PIN_OUTPUT_SELECT_LDI                  8
+#define PIN_OUTPUT_SELECT_LPP                  12
+
+/* 6 */
+#define PIN_OUTPUT_SELECT_LSCK                 0
+#define PIN_OUTPUT_SELECT_LSDA                 4
+#define PIN_OUTPUT_SELECT_LCSN                 8
+#define PIN_OUTPUT_SELECT_LDC                  12
+#define PIN_OUTPUT_SELECT_LSPI                 16
+#define PIN_OUTPUT_SELECT_LSDI                 20
 
 #define DC_COM_PIN_MISC_CONTROL                        0x31b
 #define DC_COM_PIN_PM0_CONTROL                 0x31c
@@ -303,9 +439,15 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
 #define  UNDERFLOW_REPORT_ENABLE (1 << 0)
 
 #define DC_DISP_DISP_SIGNAL_OPTIONS0           0x400
-#define H_PULSE0_ENABLE (1 <<  8)
-#define H_PULSE1_ENABLE (1 << 10)
-#define H_PULSE2_ENABLE (1 << 12)
+#define H_PULSE0_ENABLE                                BIT(8)
+#define H_PULSE1_ENABLE                                BIT(10)
+#define H_PULSE2_ENABLE                                BIT(12)
+#define V_PULSE0_ENABLE                                BIT(16)
+#define V_PULSE1_ENABLE                                BIT(18)
+#define V_PULSE2_ENABLE                                BIT(19)
+#define V_PULSE3_ENABLE                                BIT(20)
+#define M0_ENABLE                              BIT(24)
+#define M1_ENABLE                              BIT(26)
 
 #define DC_DISP_DISP_SIGNAL_OPTIONS1           0x401
 
@@ -456,6 +598,22 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
 #define DC_DISP_SHIFT_CLOCK_OPTIONS            0x431
 #define  SC1_H_QUALIFIER_NONE  (1 << 16)
 #define  SC0_H_QUALIFIER_NONE  (1 <<  0)
+#define  SC0_H_QUALIFIER(x)                    (((x) & 0x7) <<  0)
+#define  SC1_H_QUALIFIER(x)                    (((x) & 0x7) << 16)
+#define  SC_H_QUALIFIER_DISABLE                        0
+#define  SC_H_QUALIFIER_NONE                   1
+#define  SC_H_QUALIFIER_HACTIVE                        2
+#define  SC_H_QUALIFIER_EXT_HACTIVE            3
+#define  SC_H_QUALIFIER_HPULSE                 4
+#define  SC_H_QUALIFIER_EXT_HPULSE             5
+#define  SC0_V_QUALIFIER(x)                    (((x) & 0x7) <<  3)
+#define  SC1_V_QUALIFIER(x)                    (((x) & 0x7) <<  19)
+#define  SC_V_QUALIFIER_NONE                   0
+#define  SC_V_QUALIFIER_RSVD                   1
+#define  SC_V_QUALIFIER_VACTIVE                        2
+#define  SC_V_QUALIFIER_EXT_VACTIVE            3
+#define  SC_V_QUALIFIER_VPULSE                 4
+#define  SC_V_QUALIFIER_EXT_VPULSE             5
 
 #define DC_DISP_DATA_ENABLE_OPTIONS            0x432
 #define DE_SELECT_ACTIVE_BLANK  (0 << 0)
@@ -493,6 +651,20 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
 #define DC_DISP_CURSOR_POSITION_NS             0x441
 
 #define DC_DISP_INIT_SEQ_CONTROL               0x442
+#define SEND_INIT_SEQUENCE                     BIT(0)
+#define INIT_SEQUENCE_MODE_SPI                 BIT(1)
+#define INIT_SEQUENCE_MODE_PLCD                        0
+#define INIT_SEQ_DC_SIGNAL_SHIFT               4
+#define INIT_SEQ_DC_SIGNAL_MASK                        (0x7 << 
INIT_SEQ_DC_SIGNAL_SHIFT)
+#define NO_DC_SIGNAL                           0
+#define DC_SIGNAL_VSYNC                                1
+#define DC_SIGNAL_VPULSE0                      2
+#define DC_SIGNAL_VPULSE1                      3
+#define DC_SIGNAL_VPULSE2                      4
+#define DC_SIGNAL_VPULSE3                      5
+#define INIT_SEQ_DC_CONTROL_SHIFT              7
+#define FRAME_INIT_SEQ_CYCLES_SHIFT            8
+
 #define DC_DISP_SPI_INIT_SEQ_DATA_A            0x443
 #define DC_DISP_SPI_INIT_SEQ_DATA_B            0x444
 #define DC_DISP_SPI_INIT_SEQ_DATA_C            0x445
-- 
2.53.0

Reply via email to