Describe the QCA6390 power sequencer with properly voltaged supplies and enable Bluetooth HCI on GENI UART6.
Signed-off-by: Abdur Rofik <[email protected]> --- arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts index 3ce8161574a95..1426ce82d3f58 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts @@ -65,6 +65,67 @@ key-assistant { }; }; + qca6390-pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s6a_0p95>; + vddrfa0p95-supply = <&vreg_s6a_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p35>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p35>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; + reserved-memory { res_xbl_uefi_log_region: memory@80880000 { reg = <0x0 0x80880000 0x0 0x14000>; @@ -634,6 +695,14 @@ &sdhc_2 { &tlmm { gpio-reserved-ranges = <40 4>, <52 4>; + bt_en_state: bt-enable-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + sdc2_default_state: sdc2-default-state { clk-pins { pins = "sdc2_clk"; @@ -667,6 +736,29 @@ ts_int_default: ts-int-default-state { drive-strength = <8>; bias-pull-up; }; + + wlan_en_state: wlan-enable-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-low; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,qca6390-bt"; + + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + }; }; &uart12 { -- 2.39.5
