On Thu Nov 19, 2026 at 5:26 PM CET, Daniel Golle wrote: > On Wed, Nov 18, 2026 at 03:12:14AM +0000, [email protected] wrote: >> Hi Daniel, Luca, >> >> On Mon, Nov 16, 2026 at 08:56:18AM +0000, Daniel Golle wrote: >> > On Tue, Oct 20, 2026 at 06:51:39PM +0200, Luca Ceresoli wrote: >> > > If you could share what that register is for, it would probably answer >> > > some >> > > of those questions. >> > >> > I don't have documentation for it either, and with ITE gone there is >> > nobody left to ask. >> >> REG_AUDIO_INPUT_FREQ (0xBE) is a read-only input audio frequency >> counter. The driver uses it to check whether the I2S BCLK is >> present and changing, i.e. whether there is audio input. > > Great to see you are actually still around, and thank you for confirming > that we can drop the register read there. > > I was afraid the bouncing emails of the former driver maintainers would > indicate the driver has now been orphaned. It'd hence be great if you > can enlist yourself in the MAINTAINERS file for that driver. > >> > As for the logging, I don't think it is worth an extra i2c read and a >> > division in the enable path, so in v9 I'll drop the read and the >> > print from it6505_enable_audio() instead of guarding the division. >> >> Fine with us, the value is only informational there. > > +1
Ah, great, thanks Hermes for the feedback and Daniel for the patience in getting to the bottom of this! Luca -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
