On Wed, Nov 18, 2026 at 03:53:23PM +0000, Michael McAllister wrote:
> I've been working on the Moto G10, which uses a DJN NT36525B panel. I
> have a local driver, but it'd be good to share yours where possible.
>
> My panel is 720x1600 with four DSI lanes, a different init/reset
> sequence, and DCS backlight control. Would you be happy with follow-up
> patches adding panel-specific configuration and G10 support on top of
> your series? I can prepare and test those.

Hi Michael,

Sorry for the slow reply. I said in the v4 cover letter that I'd answer
you separately, and then didn't.

Yes, very happy to share the driver. Your panel is also relevant to
Krzysztof's review of the v4 binding: he asked for the compatible to
name the actual panel maker (ours is a CSOT panel), and whether this
belongs in an existing Novatek binding. With two panels on the same
controller, I'd rather structure v5 around per-panel data from the
start: mode, lane count, init and reset sequence, and backlight source
(external or DCS). The XCover5 CSOT panel would be the first entry, so
the G10 can come in as a second one without reworking the core.

If you can share your mode and init sequence, or a WIP branch, I'll
check the per-panel struct against it before sending v5 and Cc you on
it, so your G10 patch can go on top. v5 won't go out before Nov 27.

Thanks,
Adil

Reply via email to