On Fri, Mar 9, 2012 at 3:15 AM, Maarten Maathuis <madman2003 at gmail.com> wrote: > On Fri, Mar 9, 2012 at 2:50 AM, Yufeng Shen <miletus at chromium.org> wrote: >> So a simple case of ?disabling a CRTC and then re-enabling it. >> >> Disabling: >> >> CRTC X is originally connected to output Y >> >> 1. XRRSetCrtcConfig() ? ?is called to disable CRTC ?X >> >> 2. drm_helper_connector_dpms() ? then gets called on the connector >> connected to CRTC X, >> ? ?in the function, >> ? ?the ?connector->encoder ?is set to DPMS OFF, ? and the >> encoder->crtc ?set to DPMS OFF >> ? ?but the ?encoder->crtc ? is still CRTC X >> >> Re-enabling: >> >> 3. XRRSetCrtcConfig() ? ?is called to to enable CRTC ?X ?on output Y >> >> 4. drm_crtc_helper_set_config () ?is now called, >> suppose ? fb is not changed, ?mode is not changed, encoder is not changed >> and the ? encoder->crtc ?is not changed, >> then we have ? mode_changed == false ? ?and ?the mode is not reset >> >> So the CRTC X won't be connected to output Y. >> >> What I don't understand the code is that why ?XRRSetCrtcConfig() ?ends >> up only calling ?drm_helper_connector_dpms() ?? >> I think it should do more than that, at least it should set the >> related ?encoder->crtc = NULL >> >> any comments ? >> _______________________________________________ >> dri-devel mailing list >> dri-devel at lists.freedesktop.org >> http://lists.freedesktop.org/mailman/listinfo/dri-devel > > As far as i know DPMS designed is a simple switch, meaning that the > mode remains active, so if you do DPMS ON it should come back. If for > some reason the driver is disconnecting the encoder from the crtc, > then it is the drivers responsibility to reconnect it when DPMS ON > happens. > > But don't take my word for it, others may have more/other information. >
Yes, I was thinking ideally DPMS call should enable/disable DPMS state, and XRRSetCrtcConfig call should enable/disable CRTC. But it seems that, when using XRRSetCrtcConfig to disable CRTC, the CRTC itself is disabled, the DPMS is disabled (DPMS OFF), and then when using XRRSetCrtcConfig to re-enable the CRTC, it only checks whether the CRTC that connected to the encoder is changed (whether a new crtc is assigned), but does not check whether the CRTC itself is previously disabled or not. So it considers the encoder is connected to the same CRTC and does no thing to re-enable the CRTC. > -- > Far away from the primal instinct, the song seems to fade away, the > river get wider between your thoughts and the things we do and say.
