Hi Tomasz,
> -----Original Message-----
> From: Tomasz Figa [mailto:t.figa at samsung.com]
> Sent: Friday, August 09, 2013 10:16 PM
> To: Chanho Park
> Cc: inki.dae at samsung.com; kgene.kim at samsung.com; dri-
> devel at lists.freedesktop.org; kyungmin.park at samsung.com;
> mark.rutland at arm.com; l.stach at pengutronix.de; s.nawrocki at samsung.com;
> tomasz.figa at gmail.com; linux-samsung-soc at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; devicetree at vger.kernel.org; Thomas Abraham;
> swarren at wwwdotorg.org; ian.campbell at citrix.com; rob.herring at
> calxeda.com;
> pawel.moll at arm.com
> Subject: Re: [PATCHv2 5/5] ARM: dts: Add dt binding documentation for
> exynos rotator
>
> Hi Chanho,
>
> On Friday 09 of August 2013 16:40:53 Chanho Park wrote:
> > This patch describes each nodes of rotator and specifies a example how
> > to bind it.
> >
> > Signed-off-by: Chanho Park <chanho61.park at samsung.com>
> > Cc: Thomas Abraham <thomas.abraham at linaro.org>
> > Cc: Kukjin Kim <kgene.kim at samsung.com>
> > Cc: Inki Dae <inki.dae at samsung.com>
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> > ---
> > .../devicetree/bindings/gpu/samsung-rotator.txt | 26
> > ++++++++++++++++++++ 1 file changed, 26 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> >
> > diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> > b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt new file
> > mode 100644 index 0000000..31ee7b5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> > @@ -0,0 +1,26 @@
> > +* Samsung Image Rotator
> > +
> > +Required properties:
> > + - compatible : value should be following:
> > + (a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
> > + (b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
> > + (c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
> > +
> > + - reg : Physical base address of the IP registers and length of
> memory
> > + mapped region.
> > +
> > + - interrupts : Interrupt number of Rotator
>
> What about: interrupt specifier for rotator interrupt, according to
> format specific to interrupt parent.
>
> > +
> > + - clocks : Clock number described in
> > Documentations/devicetree/binding/clock. +
>
> Perhaps: clock specifier for rotator clock, according to generic clock
> bindings.
Become more clearly. Thanks.
>
> > + - clock-names : Clock name.
>
> Names of clocks specified in "clocks" property. For exynos rotator this
> property should contain only one name: "rotator".
>
> > +Example:
> > + rotator: rotator at 12800000 {
>
> I wonder if we shouldn't use a more generic name here, according to
> ePAPR node naming recommendation.
Hmm. I'm not sure what name is better than rotator.
How about
image-rotator at 12810000
>
> > + compatible = "samsung,exynos4210-rotator";
> > + reg = <0x12810000 0x1000>;
>
> Typo. Node has 12800000 in unit-address suffix, but this property has
> 12810000 instead.
Yes. It's typo. I'll correct it now.
>
> > + interrupts = <0 83 0>;
> > + clocks = <&clock 278>;
> > + clock-names = "rotator";
> > + status = "disabled";
>
> Status property should be omitted from this example, as it's not a part
> of this binding.
I'll remove the property.
Thanks.
Best Regards,
Chanho Park
