Hello I have a problem using a 1024x768 Eizo Monitor attached by DVI-D to a system with GMA500 based graphics and running under Linux-3.7.
As soon as the GMA500 driver is taking over control, the refresh rate raises to 64.5Hz and the monitor reports a "signal error". For me i looks like the GMA500 driver is reprogramming the VCO to a too high dot clock. If i lower the "I9XX_VCO_MIN" value to 1300000, everything is fine. Is the "I9XX_VCO_MIN" value used in the GMA500 driver correct? Dave
