From: Alex Deucher <alexander.deuc...@amd.com>
May produce better results with some modes and also avoids
overflows on DCE2.x/3.x devices.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
---
drivers/gpu/drm/radeon/evergreen_hdmi.c | 7 +++----
drivers/gpu/drm/radeon/r600_hdmi.c | 11 +++++------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c
b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index b4ab8ce..84d6822 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -154,19 +154,18 @@ static void evergreen_audio_set_dto(struct drm_encoder
*encoder, u32 clock)
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, (base_rate*50) & 0xffffff);
- WREG32(DCCG_AUDIO_DTO0_MODULE, (clock*100) & 0xffffff);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate / 10);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, clock / 10);
WREG32(DCCG_AUDIO_DTO_SOURCE,
DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
}
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c
b/drivers/gpu/drm/radeon/r600_hdmi.c
index 47f180a..70c4ecb 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -232,7 +232,7 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32
clock)
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- u32 base_rate = 48000;
+ u32 base_rate = 24000;
if (!dig || !dig->afmt)
return;
@@ -240,7 +240,6 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32
clock)
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
- /* XXX: properly calculate this */
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
@@ -250,13 +249,13 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32
clock)
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0 as well.
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 50);
- WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate / 10);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, clock / 10);
WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0
*/
- WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate * 50) |
- AUDIO_DTO_MODULE(clock * 100));
+ WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
+ AUDIO_DTO_MODULE(clock / 10));
}
}
--
1.7.7.5
