Hi! On Fri, 25 Apr 2014 19:03:22 -0400, Jerome Glisse <j.glisse at gmail.com> wrote: > On Fri, Apr 25, 2014 at 05:50:57PM -0400, Jerome Glisse wrote: > > On Fri, Apr 25, 2014 at 05:47:48PM -0400, Jerome Glisse wrote: > > > On Thu, Apr 24, 2014 at 09:37:22AM -0400, Johannes Weiner wrote:
Guys, thanks for following up on that one! We're currently renovating our (new) home, and relocating, so not much time to look into this issue, but I'll try my best, and here are some results: > > > > On Wed, Apr 02, 2014 at 04:26:08PM +0200, Thomas Schwinge wrote: > > > > > On Fri, 2 Aug 2013 11:37:26 -0400, Johannes Weiner <hannes at > > > > > cmpxchg.org> wrote: > > > > > > Each zone that holds userspace pages of one workload must be aged > > > > > > at a > > > > > > speed proportional to the zone size. [...] > > > > > > > > > > > Fix this with a very simple round robin allocator. [...] > > > > > > > > > > This patch, adding NR_ALLOC_BATCH, eventually landed in mainline as > > > > > commit 81c0a2bb515fd4daae8cab64352877480792b515 (2013-09-11). > > > > > > > > > > I recently upgraded a Debian testing system from a 3.11 kernel to > > > > > 3.12, > > > > > and it started to exhibit "strange" issues, which I then bisected to > > > > > this > > > > > patch. I'm not saying that the patch is faulty, as it seems to be > > > > > working fine for everyone else, so I rather assume that something in a > > > > > (vastly?) different corner of the kernel (or my hardware?) is broken. > > > > > ;-) > > > > > > > > > > The issue is that when X.org/lightdm starts up, there are "garbled" > > > > > section on the screen, for example, rectangular boxes that are just > > > > > black > > > > > or otherwise "distorted", and/or sets of glyphs (corresponding to a > > > > > set > > > > > of characters; but not all characters) are displayed as rectangular > > > > > gray > > > > > or black boxes, and/or icons in a GNOME session are not displayed > > > > > properly, and so on. (Can take a snapshot if that helps?) Switching > > > > > to > > > > > a Linux console, I can use that one fine. Switching back to X, in the > > > > > majority of all cases, the screen will be completely black, but with > > > > > the > > > > > mouse cursor still rendered properly (done in hardware, I assume). > > > > > > > > > > Reverting commit 81c0a2bb515fd4daae8cab64352877480792b515, for > > > > > example on > > > > > top of v3.12, and everything is back to normal. The problem also > > > > > persists with a v3.14 kernel that I just built. > > > > > > > > > > I will try to figure out what's going on, but will gladly take any > > > > > pointers, or suggestions about how to tackle such a problem. > > > > > > > > > > The hardware is a Fujitsu Siemens Esprimo E5600, mainboard D2264-A1, > > > > > CPU > > > > > AMD Sempron 3000+. There is a on-board graphics thingy, but I'm not > > > > > using that; instead I put in a Sapphire Radeon HD 4350 card. > > > > > > > > I went over this code change repeatedly but I could not see anything > > > > directly that would explain it. However, this patch DOES change the > > > > way allocations are placed (while still respecting zone specifiers > > > > like __GFP_DMA etc.) and so it's possible that they unearthed a > > > > corruption, or a wrongly set dma mask in the drivers. OK, that was my impression too from reading the patch -- though, in contrast to you, I'm not familiar with this Linux kernel code, so might easily miss some "details". ;-) > > > Can we get a full dmesg, to know if thing like IOMMU are enabled or not. Attached dmesg-v3.12 and dmesg-v3.14. > > > This is even more puzzling as rv710 has 40bit dma mask iirc and thus you > > > should be fine even without IOMMU. But given the patch you point to, it > > > really can only be something that allocate page in place the GPU fails > > > to access. > > > > > > Thomas how much memory do you have (again dmes will also provide mapping > > > informations) ? 4 GiB; see dmesg. > > > My guess is that the pcie bridge can only remap dma page with 32bit dma > > > mask while the gpu is fine with 40bit dma mask. I always thought that the > > > pcie/pci code did take care of such thing for us. > > > > Forgot to attach patch to test my theory. Does the attached patch fix > > the issue ? Unfortunately it does not. :-/ > So this is likely it, the SIS chipset of this motherboard is a freak show. Well, it has been a freak show before: system crash if I put into the CD drive a specific audio CD: <http://news.gmane.org/find-root.php?message_id=%3C87obojef7t.fsf%40schwinge.name%3E>. (This issue remains unresolved, unless it has "fixed itself" -- I have not recently tried what happens now.) > It support both PCIE and AGP at same time > > http://www.newegg.com/Product/Product.aspx?Item=N82E16813185068 > > Why in hell ? > > So my guess is that the root pcie bridge is behind the AGP bridge which > swallow any address > 32bit and thus the dma mask of the pcie radeon > card is just believing that we are living in a sane world. $ lspci -vt -[0000:00]-+-00.0 Silicon Integrated Systems [SiS] 761/M761 Host +-01.0-[01]--+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4530/4570/545v] | \-00.1 Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series] +-02.0 Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] +-02.5 Silicon Integrated Systems [SiS] 5513 IDE Controller +-02.7 Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller +-03.0 Silicon Integrated Systems [SiS] USB 1.1 Controller +-03.1 Silicon Integrated Systems [SiS] USB 1.1 Controller +-03.2 Silicon Integrated Systems [SiS] USB 1.1 Controller +-03.3 Silicon Integrated Systems [SiS] USB 2.0 Controller +-05.0 Silicon Integrated Systems [SiS] 182 SATA/RAID Controller +-06.0-[02]-- +-09.0 Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller +-18.0 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration +-18.1 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map +-18.2 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller \-18.3 Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Full quote follows: > > > > > $ cat < /proc/cpuinfo > > > > > processor : 0 > > > > > vendor_id : AuthenticAMD > > > > > cpu family : 15 > > > > > model : 47 > > > > > model name : AMD Sempron(tm) Processor 3000+ > > > > > stepping : 2 > > > > > cpu MHz : 1000.000 > > > > > cache size : 128 KB > > > > > physical id : 0 > > > > > siblings : 1 > > > > > core id : 0 > > > > > cpu cores : 1 > > > > > apicid : 0 > > > > > initial apicid : 0 > > > > > fpu : yes > > > > > fpu_exception : yes > > > > > cpuid level : 1 > > > > > wp : yes > > > > > flags : fpu vme de pse tsc msr pae mce cx8 apic sep > > > > > mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx > > > > > mmxext fxsr_opt lm 3dnowext 3dnow rep_good nopl pni lahf_lm > > > > > bogomips : 2000.20 > > > > > TLB size : 1024 4K pages > > > > > clflush size : 64 > > > > > cache_alignment : 64 > > > > > address sizes : 40 bits physical, 48 bits virtual > > > > > power management: ts fid vid ttp tm stc > > > > > $ sudo lspci -nn -k -vv > > > > > 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] > > > > > 761/M761 Host [1039:0761] (rev 01) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > Motherboard [1734:1099] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > > > Latency: 64 > > > > > Region 0: Memory at f0000000 (32-bit, non-prefetchable) > > > > > [size=32M] > > > > > Capabilities: [a0] AGP version 3.0 > > > > > Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- > > > > > GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 > > > > > Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- > > > > > 64bit- FW- Rate=<none> > > > > > Capabilities: [d0] HyperTransport: Slave or Primary > > > > > Interface > > > > > Command: BaseUnitID=0 UnitCnt=17 MastHost- > > > > > DefDir- DUL- > > > > > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ > > > > > EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > > > > > Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit > > > > > DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > > > > > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- > > > > > EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > > > > > Link Config 1: MLWI=N/C DwFcIn- MLWO=N/C DwFcOut- > > > > > LWI=N/C DwFcInEn- LWO=N/C DwFcOutEn- > > > > > Revision ID: 1.05 > > > > > Link Frequency 0: 800MHz > > > > > Link Error 0: <Prot- <Ovfl- <EOC- CTLTm- > > > > > Link Frequency Capability 0: 200MHz+ 300MHz- > > > > > 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- > > > > > Feature Capability: IsocFC- LDTSTOP+ CRCTM- > > > > > ECTLT- 64bA+ UIDRD- > > > > > Link Frequency 1: 200MHz > > > > > Link Error 1: <Prot- <Ovfl- <EOC- CTLTm- > > > > > Link Frequency Capability 1: 200MHz- 300MHz- > > > > > 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > > > > > Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- > > > > > CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- > > > > > Prefetchable memory behind bridge Upper: 00-00 > > > > > Bus Number: 00 > > > > > Capabilities: [f0] HyperTransport: Interrupt Discovery > > > > > and Configuration > > > > > Capabilities: [5c] HyperTransport: Revision ID: 1.05 > > > > > Kernel driver in use: agpgart-amd64 > > > > > > > > > > 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] > > > > > PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 0, Cache Line Size: 64 bytes > > > > > Bus: primary=00, secondary=01, subordinate=01, > > > > > sec-latency=0 > > > > > I/O behind bridge: 00002000-00002fff > > > > > Memory behind bridge: f2100000-f21fffff > > > > > Prefetchable memory behind bridge: e0000000-efffffff > > > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > > > > > BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- > > > > > FastB2B- > > > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- > > > > > DiscTmrSERREn- > > > > > Capabilities: [d0] Express (v1) Root Port (Slot+), MSI 00 > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > > > > ExtTag+ RBE- > > > > > DevCtl: Report errors: Correctable- Non-Fatal- > > > > > Fatal- Unsupported- > > > > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- > > > > > NoSnoop+ > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ > > > > > AuxPwr+ TransPend- > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM > > > > > L0s L1, Exit Latency L0s <1us, L1 <2us > > > > > ClockPM- Surprise- LLActRep+ BwNot- > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- > > > > > CommClk+ > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- > > > > > AutBWInt- > > > > > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- > > > > > SlotClk+ DLActive+ BWMgmt- ABWMgmt- > > > > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > > > > > HotPlug- Surprise- > > > > > Slot #0, PowerLimit 75.000W; Interlock- > > > > > NoCompl- > > > > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- > > > > > CmdCplt- HPIrq- LinkChg- > > > > > Control: AttnInd Off, PwrInd Off, Power- > > > > > Interlock- > > > > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > > > > > PresDet+ Interlock- > > > > > Changed: MRL- PresDet- LinkState- > > > > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > > > > > PMEIntEna- CRSVisible- > > > > > RootCap: CRSVisible- > > > > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > > > > Capabilities: [bc] HyperTransport: MSI Mapping Enable- > > > > > Fixed+ > > > > > Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit- > > > > > Address: 00000000 Data: 0000 > > > > > Capabilities: [f4] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > > > > PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: pcieport > > > > > > > > > > 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] > > > > > SiS965 [MuTIOL Media IO] [1039:0965] (rev 48) > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > > > Latency: 0 > > > > > > > > > > 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] > > > > > 5513 IDE Controller [1039:5513] (rev 01) (prog-if 80 [Master]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > Motherboard [1734:1095] > > > > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 128 > > > > > Interrupt: pin ? routed to IRQ 16 > > > > > Region 0: I/O ports at 01f0 [size=8] > > > > > Region 1: I/O ports at 03f4 > > > > > Region 2: I/O ports at 0170 [size=8] > > > > > Region 3: I/O ports at 0374 > > > > > Region 4: I/O ports at 1c80 [size=16] > > > > > Capabilities: [58] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > > > > PME(D0-,D1-,D2-,D3hot-,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: pata_sis > > > > > > > > > > 00:02.7 Multimedia audio controller [0401]: Silicon Integrated > > > > > Systems [SiS] SiS7012 AC'97 Sound Controller [1039:7012] (rev a0) > > > > > Subsystem: Fujitsu Technology Solutions Device [1734:109c] > > > > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 173 (13000ns min, 2750ns max) > > > > > Interrupt: pin C routed to IRQ 18 > > > > > Region 0: I/O ports at 1400 [size=256] > > > > > Region 1: I/O ports at 1000 [size=128] > > > > > Capabilities: [48] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA > > > > > PME(D0-,D1-,D2-,D3hot+,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: snd_intel8x0 > > > > > > > > > > 00:03.0 USB controller [0c03]: Silicon Integrated Systems [SiS] > > > > > USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > Motherboard [1734:1095] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 (20000ns max) > > > > > Interrupt: pin A routed to IRQ 20 > > > > > Region 0: Memory at f2000000 (32-bit, non-prefetchable) > > > > > [size=4K] > > > > > Kernel driver in use: ohci-pci > > > > > > > > > > 00:03.1 USB controller [0c03]: Silicon Integrated Systems [SiS] > > > > > USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > Motherboard [1734:1095] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 (20000ns max) > > > > > Interrupt: pin B routed to IRQ 21 > > > > > Region 0: Memory at f2001000 (32-bit, non-prefetchable) > > > > > [size=4K] > > > > > Kernel driver in use: ohci-pci > > > > > > > > > > 00:03.2 USB controller [0c03]: Silicon Integrated Systems [SiS] > > > > > USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > Motherboard [1734:1095] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 (20000ns max) > > > > > Interrupt: pin C routed to IRQ 22 > > > > > Region 0: Memory at f2002000 (32-bit, non-prefetchable) > > > > > [size=4K] > > > > > Kernel driver in use: ohci-pci > > > > > > > > > > 00:03.3 USB controller [0c03]: Silicon Integrated Systems [SiS] > > > > > USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > [1734:1095] > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 (20000ns max) > > > > > Interrupt: pin D routed to IRQ 23 > > > > > Region 0: Memory at f2003000 (32-bit, non-prefetchable) > > > > > [size=4K] > > > > > Capabilities: [50] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > > > > > PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: ehci-pci > > > > > > > > > > 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] > > > > > 182 SATA/RAID Controller [1039:0182] (rev 01) (prog-if 8f [Master > > > > > SecP SecO PriP PriO]) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > [1734:1095] > > > > > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 > > > > > Interrupt: pin A routed to IRQ 17 > > > > > Region 0: I/O ports at 1cb0 [size=8] > > > > > Region 1: I/O ports at 1ca4 [size=4] > > > > > Region 2: I/O ports at 1ca8 [size=8] > > > > > Region 3: I/O ports at 1ca0 [size=4] > > > > > Region 4: I/O ports at 1c90 [size=16] > > > > > Region 5: I/O ports at 1c00 [size=128] > > > > > Capabilities: [58] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > > > > PME(D0-,D1-,D2-,D3hot-,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: sata_sis > > > > > > > > > > 00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] > > > > > PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode]) > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 0, Cache Line Size: 64 bytes > > > > > Bus: primary=00, secondary=02, subordinate=02, > > > > > sec-latency=0 > > > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > > > > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- > > > > > FastB2B- > > > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- > > > > > DiscTmrSERREn- > > > > > Capabilities: [b0] Subsystem: Silicon Integrated Systems > > > > > [SiS] Device [1039:0000] > > > > > Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit- > > > > > Address: fee0100c Data: 4181 > > > > > Capabilities: [d0] Express (v1) Root Port (Slot+), MSI 00 > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > > > > ExtTag+ RBE- > > > > > DevCtl: Report errors: Correctable- Non-Fatal- > > > > > Fatal- Unsupported- > > > > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- > > > > > NoSnoop+ > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > > > > > AuxPwr+ TransPend- > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM > > > > > L0s L1, Exit Latency L0s <1us, L1 <2us > > > > > ClockPM- Surprise- LLActRep- BwNot- > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- > > > > > CommClk- > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- > > > > > AutBWInt- > > > > > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- > > > > > SlotClk+ DLActive- BWMgmt- ABWMgmt- > > > > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- > > > > > HotPlug- Surprise- > > > > > Slot #0, PowerLimit 0.000W; Interlock- > > > > > NoCompl- > > > > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- > > > > > CmdCplt- HPIrq- LinkChg- > > > > > Control: AttnInd Off, PwrInd Off, Power- > > > > > Interlock- > > > > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- > > > > > PresDet+ Interlock- > > > > > Changed: MRL- PresDet- LinkState- > > > > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- > > > > > PMEIntEna- CRSVisible- > > > > > RootCap: CRSVisible- > > > > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > > > > Capabilities: [f4] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > > > > > PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Capabilities: [100 v1] Virtual Channel > > > > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > > > > > Arb: Fixed- WRR32- WRR64- WRR128- > > > > > Ctrl: ArbSelect=Fixed > > > > > Status: InProgress- > > > > > VC0: Caps: PATOffset=00 MaxTimeSlots=1 > > > > > RejSnoopTrans- > > > > > Arb: Fixed- WRR32- WRR64- WRR128- > > > > > TWRR128- WRR256- > > > > > Ctrl: Enable+ ID=0 ArbSelect=Fixed > > > > > TC/VC=ff > > > > > Status: NegoPending- InProgress- > > > > > Capabilities: [130 v1] Advanced Error Reporting > > > > > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > > > > > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > > > > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > > > > > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- > > > > > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- > > > > > UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- > > > > > CESta: RxErr- BadTLP- BadDLLP- Rollover- > > > > > Timeout- NonFatalErr- > > > > > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- > > > > > Timeout- NonFatalErr- > > > > > AERCap: First Error Pointer: 00, GenCap- CGenEn- > > > > > ChkCap- ChkEn- > > > > > Kernel driver in use: pcieport > > > > > > > > > > 00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., > > > > > Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) > > > > > Subsystem: Fujitsu Technology Solutions D2030-A1 > > > > > [1734:1091] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 64 (8000ns min, 16000ns max), Cache Line Size: > > > > > 32 bytes > > > > > Interrupt: pin A routed to IRQ 19 > > > > > Region 0: I/O ports at 1800 [size=256] > > > > > Region 1: Memory at f2004000 (32-bit, non-prefetchable) > > > > > [size=256] > > > > > Capabilities: [dc] Power Management version 2 > > > > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > > > > > PME(D0-,D1+,D2+,D3hot+,D3cold+) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Kernel driver in use: r8169 > > > > > > > > > > 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > > > > > [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] > > > > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Capabilities: [80] HyperTransport: Host or Secondary > > > > > Interface > > > > > Command: WarmRst+ DblEnd- DevNum=0 ChainSide- > > > > > HostHide+ Slave- <EOCErr- DUL- > > > > > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- > > > > > TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b- > > > > > Link Config: MLWI=16bit DwFcIn- MLWO=16bit > > > > > DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn- > > > > > Revision ID: 1.02 > > > > > Link Frequency: 800MHz > > > > > Link Error: <Prot- <Ovfl- <EOC- CTLTm- > > > > > Link Frequency Capability: 200MHz+ 300MHz- > > > > > 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- > > > > > Feature Capability: IsocFC- LDTSTOP+ CRCTM- > > > > > ECTLT- 64bA- UIDRD- ExtRS- UCnfE- > > > > > > > > > > 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > > > > > [Athlon64/Opteron] Address Map [1022:1101] > > > > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > > > > > > 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > > > > > [Athlon64/Opteron] DRAM Controller [1022:1102] > > > > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Kernel driver in use: amd64_edac > > > > > > > > > > 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 > > > > > [Athlon64/Opteron] Miscellaneous Control [1022:1103] > > > > > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Kernel driver in use: k8temp > > > > > > > > > > 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, > > > > > Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4530/4570/545v] > > > > > [1002:9553] (prog-if 00 [VGA controller]) > > > > > Subsystem: PC Partner Limited / Sapphire Technology > > > > > Device [174b:3092] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > > > Latency: 0, Cache Line Size: 64 bytes > > > > > Interrupt: pin A routed to IRQ 42 > > > > > Region 0: Memory at e0000000 (64-bit, prefetchable) > > > > > [size=256M] > > > > > Region 2: Memory at f2100000 (64-bit, non-prefetchable) > > > > > [size=64K] > > > > > Region 4: I/O ports at 2000 [size=256] > > > > > [virtual] Expansion ROM at f2120000 [disabled] [size=128K] > > > > > Capabilities: [50] Power Management version 3 > > > > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > > > > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, > > > > > Latency L0s <4us, L1 unlimited > > > > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ > > > > > FLReset- > > > > > DevCtl: Report errors: Correctable- Non-Fatal- > > > > > Fatal- Unsupported- > > > > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- > > > > > NoSnoop+ > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > > > > > AuxPwr- TransPend- > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM > > > > > L0s L1, Exit Latency L0s <64ns, L1 <1us > > > > > ClockPM- Surprise- LLActRep- BwNot- > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- > > > > > CommClk+ > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- > > > > > AutBWInt- > > > > > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- > > > > > SlotClk+ DLActive- BWMgmt- ABWMgmt- > > > > > DevCap2: Completion Timeout: Not Supported, > > > > > TimeoutDis-, LTR-, OBFF Not Supported > > > > > DevCtl2: Completion Timeout: 50us to 50ms, > > > > > TimeoutDis-, LTR-, OBFF Disabled > > > > > LnkCtl2: Target Link Speed: 2.5GT/s, > > > > > EnterCompliance- SpeedDis- > > > > > Transmit Margin: Normal Operating Range, > > > > > EnterModifiedCompliance- ComplianceSOS- > > > > > Compliance De-emphasis: -6dB > > > > > LnkSta2: Current De-emphasis Level: -6dB, > > > > > EqualizationComplete-, EqualizationPhase1- > > > > > EqualizationPhase2-, > > > > > EqualizationPhase3-, LinkEqualizationRequest- > > > > > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > > > > > Address: 00000000fee0100c Data: 41e1 > > > > > Capabilities: [100 v1] Vendor Specific Information: > > > > > ID=0001 Rev=1 Len=010 <?> > > > > > Kernel driver in use: radeon > > > > > > > > > > 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. > > > > > [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series] [1002:aa38] > > > > > Subsystem: PC Partner Limited / Sapphire Technology > > > > > Device [174b:aa38] > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > > > > > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > > > > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > Latency: 0, Cache Line Size: 64 bytes > > > > > Interrupt: pin B routed to IRQ 41 > > > > > Region 0: Memory at f2110000 (64-bit, non-prefetchable) > > > > > [size=16K] > > > > > Capabilities: [50] Power Management version 3 > > > > > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > > > > > PME(D0-,D1-,D2-,D3hot-,D3cold-) > > > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 > > > > > PME- > > > > > Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, > > > > > Latency L0s <4us, L1 unlimited > > > > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ > > > > > FLReset- > > > > > DevCtl: Report errors: Correctable- Non-Fatal- > > > > > Fatal- Unsupported- > > > > > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- > > > > > NoSnoop+ > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- > > > > > AuxPwr- TransPend- > > > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM > > > > > L0s L1, Exit Latency L0s <64ns, L1 <1us > > > > > ClockPM- Surprise- LLActRep- BwNot- > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- > > > > > CommClk+ > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- > > > > > AutBWInt- > > > > > LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- > > > > > SlotClk+ DLActive- BWMgmt- ABWMgmt- > > > > > DevCap2: Completion Timeout: Not Supported, > > > > > TimeoutDis-, LTR-, OBFF Not Supported > > > > > DevCtl2: Completion Timeout: 50us to 50ms, > > > > > TimeoutDis-, LTR-, OBFF Disabled > > > > > LnkSta2: Current De-emphasis Level: -6dB, > > > > > EqualizationComplete-, EqualizationPhase1- > > > > > EqualizationPhase2-, > > > > > EqualizationPhase3-, LinkEqualizationRequest- > > > > > Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > > > > > Address: 00000000fee0100c Data: 41d1 > > > > > Capabilities: [100 v1] Vendor Specific Information: > > > > > ID=0001 Rev=1 Len=010 <?> > > > > > Kernel driver in use: snd_hda_intel Gr??e, Thomas -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: dmesg-v3.12 URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140428/a8a41357/attachment-0002.ksh> -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: dmesg-v3.14 URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140428/a8a41357/attachment-0003.ksh> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 489 bytes Desc: not available URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140428/a8a41357/attachment-0001.sig>
