From: Alex Deucher <alexander.deuc...@amd.com>
If the display hw was reset or a hard reset was used,
we need to re-init some of the common display hardware as well.
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Christian K?nig <christian.koenig at amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst at canonical.com>
Cc: stable at vger.kernel.org
---
drivers/gpu/drm/radeon/radeon_device.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/radeon/radeon_device.c
b/drivers/gpu/drm/radeon/radeon_device.c
index d2ff12e..b6aee40 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1683,6 +1683,7 @@ int radeon_gpu_reset(struct radeon_device *rdev)
/* block TTM */
resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
radeon_suspend(rdev);
+ radeon_hpd_fini(rdev);
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
ring_sizes[i] = radeon_ring_backup(rdev, &rdev->ring[i],
@@ -1739,6 +1740,21 @@ retry:
radeon_pm_resume(rdev);
}
+ /* init dig PHYs, disp eng pll */
+ if (rdev->is_atom_bios) {
+ radeon_atom_encoder_init(rdev);
+ radeon_atom_disp_eng_pll_init(rdev);
+ /* turn on the BL */
+ if (rdev->mode_info.bl_encoder) {
+ u8 bl_level = radeon_get_backlight_level(rdev,
+
rdev->mode_info.bl_encoder);
+ radeon_set_backlight_level(rdev,
rdev->mode_info.bl_encoder,
+ bl_level);
+ }
+ }
+ /* reset hpd state */
+ radeon_hpd_init(rdev);
+
drm_helper_resume_force_mode(rdev->ddev);
/* set the power state here in case we are a PX system or headless */
--
1.9.1
