On Wed, 2002-06-26 at 17:43, Massimiliano Lingua wrote: > On Thu, 2002-06-27 at 00:24, John J. Tobin wrote: > > > Alright, I have it built, took long enough on my K6-2 laptop but I have > > having some problems. Glxinfo reports that there is direct rendering and > > everything but if I try to run glxgears the system hard locks. The specs > > are: > > Sager NP9800 laptop > > AMD K6-2 350 > > S3 Virge MX+ video 4 MB Vram > > 128MB SDRAM > > Intel 430TX chipset, no AGP > > > > I built it against XFree86 4.2.0. > > > > Try these: > 1) define _VIRGEDX in s3v_dma.c > 2) raise S3V_UDELAY from 1 to 1000 in s3v_sma.c > > Lemme know, > > vale, > - max >
No change, it still hard locks the system. I tried the binary snapshot too and the kernel modules wouldn't build. The windows for gears will open and then a section of the lower half of the screen becomes corrupted at the lock up. -- John Tobin [EMAIL PROTECTED]; AOL IM: ogre7929 http://ogre.rocky-road.net http://ogre.rocky-road.net/cdr.shtml ------------------------------------------------------- This sf.net email is sponsored by: Jabber Inc. Don't miss the IM event of the season | Special offer for OSDN members! JabberConf 2002, Aug. 20-22, Keystone, CO http://www.jabberconf.com/osdn _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel