Hello all, I recently upraded from an SMP VIA PIII motherboard to a UP Intel I845 P4 motherboard. So far, things have gone pretty smoothly (I've needed to upgrade to 2.4.20 to support the new ICH4 IDE controller).
There are a few remaining issues I'm facing, and one of them has to do with the DRI: it locks up this machine solid. I have a Radeon 8500 which worked beautifully on the VIA motherboard. I have, of course, compiled agpgart with support for the i845, and it loads fine: agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i845 chipset agpgart: AGP aperture is 64M @ 0xd0000000 This afternoon I rebuilt and installed the entire DRI to see if that would solve the problem. It did not. Basically, if I run 'startx', the machine completely locks up. It no longer responds to pings, and the terminal I have from another machine (through kermit) is completely unresponsive. In fact, if I start 'tail -f /var/log/XFree86.0.log' from the terminal before I startx, *nothing* is printed out before the computer locks up. Interestingly, though, the FireGL drivers from ATI run just fine on this new motherboard. Any ideas? Adam ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel