On Thu, 5 Jun 2003 14:21:53 -0600 Nicholas Leippe <[EMAIL PROTECTED]> wrote:
> On Thursday 05 June 2003 01:25 pm, [EMAIL PROTECTED] wrote: > > On Thursday 05 June 2003 11:18 am, Michel Dänzer wrote: > > > On Thu, 2003-06-05 at 11:24, [EMAIL PROTECTED] wrote: > > > > I just upgraded my 2x933 p3 to 2x1400 p3-tualatin, and now > > > > whenever I start up Q3A the machine hangs hard. > > > > > > > > On one occasion, Q3A started, but the sound was all screwy, and > > > > on exit q3a segfaulted. xmms, however, still played sound just > > > > fine. > > > > > > > > The other few times I tried, it instantly locked up hard > > > > requiring reboots. > > > > > > > > With the 933 cpus, there never was any problem like this. > > > > > > > > 64mb ddr Radeon vivo @ agp 4x > > > > > > Have you tried more conservative AGP settings? > > > > Okay, if I set it all the way down to 1x, it doesn't seem to hang > > anymore(at least it hasn't yet). I tried turning off AGPFastWrite, > > but that didn't help. > > Okay, I have to take that back. It just crashed at 1x as well. > First, I started q3a and got garbled sound. So I quit, stopped my md > devices, and started q3a again--instant hard lockup. > > So, no magic bullet w/1x either. Another stupid question: What's your PSU like? That is a lot more power being used? Note I've never owned socket 370 (socket A) so I don't follow die shrinks (lower power consumption) etc. I ask because agp1x vs agp2x & agp4x use different voltages, which made me think of power consumption. Liam ---- it depends ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
