On Fri, 2003-10-31 at 00:43, Roland Scheidegger wrote: > Ronny V. Vindenes wrote: > > Something in the last week or two broke the r200 driver. After I cvs > > update'ed and recompiled yesterday, I get this error: > > > > (EE) RADEON(0): RADEONCPGetBuffer: CP GetBuffer -1020 > > (EE) RADEON(0): GetBuffer timed out, resetting engine... > > (EE) RADEON(0): RADEONCPGetBuffer: CP reset -1020 > > (EE) RADEON(0): RADEONCPGetBuffer: CP start -1020 > > > > and it gets stuck there repeating the error over and over (the first > > time it happened the log grew to almost 800mb before I noticed that > > something was wrong). > > > > Reverting to XFree86 Version 4.3.0 (Fedora Core 1: 4.3.0-42), everything > > works as normal, and if I then reinstall cvs version it works until the > > next cold boot. I'm guessing something isn't being initialized correctly > > in current cvs. > > > > Card is 9000/128mb under linux 2.6.0-test9 (athlon64 running in pure > > 32bit mode) with an lcd connected to dvi. > > > > The (cut down) log is here: > > http://www.lstud.ii.uib.no/~s864/XFree86.0.log > > From the log, the card gets detected as a PCI card, but from the bus id > I'd say it's a AGP card, is that true? In that case, it looks like the > test for AGP/PCI doesn't work correctly.
It is an AGP card, but the amd64-agp module in 2.6.0-test9 doesn't detect the VIA K8T800 chipset [1] (agpgart in 2.4.23-pre9 does detect it, but XFree86 still defaults to pcigart [2]). > In radeon_driver.c, it says "Following detection method works for all > cards tested so far." Guess your card is the first it doesn't :-( > If that's the case, you can try to get it to work with "BusType" "AGP" > in the XF86Config file. > Though I'd have assumed that a AGP card detected as PCI should still work. Setting "BusType" "AGP" makes no difference. Just to clarify, it is detected as PCI when using older working also. [1] I can get it to load by some hand tweaking of some of the tests in the module, but it still works no better than 2.4.23-pre9. [2] Someone with the same motherboard is seeing the same problem with agp not working: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=107805 -- Ronny V. Vindenes <[EMAIL PROTECTED]> ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel