On 9/28/05, John Shillinglaw <[EMAIL PROTECTED]> wrote: > Hello, > > I have a Thinkpad T20 with a Savage IX, that is running Gentoo Linux > with 2.6.14-rc2-mm1 kernel. > > In order to get direct rendering working, I have followed the build from > cvs instructions on the dri wiki. Now everything seems to work, dmesg > shows no errors, and the xorg log tells me direct rendering is enabled, > and I can run glxgears with fps from 150 up to 300. > > However, glxinfo bombs with a seg fault message, and tuxracer locks up > the computer before actually getting to the play screen. > > I've compiled with the latest xorg cvs, dri cvs, mesa cvs, etc. > > Any ideas? > >
I think Brian's renderbuffer changes may be the cause. If you go to a version of mesa cvs prior to the changes it should work. I've lots of other reports of this problem on savage; cc'ing dri-devel. Alex ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel